A Study of Micro-EDM on Silicon Nitride Using Electrode Materials

被引：0
|
作者：
Muttamara, Apiwat [1 ]
Janmanee, Pichai [1 ,2 ]
Fukuzawa, Yasushi [3 ]
机构：
[1] Thammasat Univ, Dept Ind Engn, Fac Engn, Bangkok, Thailand
[2] Rajamangala Univ Technol Krungthep, Dept Ind Engn, Bangkok, Thailand
[3] Nagaoka Univ Technol, Dept Mech Engn, Fac Engn, Nagaoka, Niigata, Japan
来源：
INTERNATIONAL TRANSACTION JOURNAL OF ENGINEERING MANAGEMENT & APPLIED SCIENCES & TECHNOLOGIES | 2010年 / 1卷 / 01期
关键词：
Electrical discharge machining (EDM); Microelectrodes Wear; electrode wear ratio (EWR); Micro-EDM;
D O I：
暂无
中图分类号：
O [数理科学和化学]; P [天文学、地球科学]; Q [生物科学]; N [自然科学总论];
学科分类号：
07 ; 0710 ; 09 ;
摘要：
This research proposes Cu, CuW and AgW for electrode materials for micro-electro-discharge machining (micro-EDM), which are produced with block electrode on insulating Si3N4. With these electrodes, some trials were evaluated considering the EDM conditions. The machining properties were estimated by the removal rate and tool wear ratio. The same phenomena are applied at the micron level for micro machining. The conductive layer was investigated on the micro-hole. This study aimed at the minimum of discharge energy to generate the conductive layer resulting to success micro-EDM on insulating ceramics. (C) 2010 International Transaction Journal of Engineering, Management, & Applied Sciences & Technologies. Some Rights Reserved.
引用
收藏
页码：1 / 7
页数：7
相关论文
共 50 条
  • [41] Basic study on pulse generator for micro-EDM
    Han, Fuzhu
    Chen, Li
    Yu, Dingwen
    Zhou, Xiaoguang
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2007, 33 (5-6): : 474 - 479
  • [42] A Study on Plasma Channel Expansion in Micro-EDM
    Chu, Xuyang
    Zhu, Kai
    Wang, Chunmei
    Hu, Zhipeng
    Zhang, Yiru
    MATERIALS AND MANUFACTURING PROCESSES, 2016, 31 (04) : 381 - 390
  • [43] Study of the method during Micro-EDM Process
    Liu, Shuyang
    Han, Zhihong
    PROCEEDINGS OF THE 2015 INTERNATIONAL CONFERENCE ON STRUCTURAL, MECHANICAL AND MATERIAL ENGINEERING (ICSMME 2015), 2016, 19 : 158 - 160
  • [44] Study on the micro-EDM processing characteristics of Ti-6Al-4V alloy with different electrode materials
    Chen, Sheng-gui
    Lian, Man-qun
    Wu, Xiao-yu
    Lei, Jian-guo
    Zhao, Hang
    Peng, Tai-jiang
    Luo, Feng
    Yang, Jun
    Xu, Bin
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2021, 116 (11-12): : 3369 - 3376
  • [45] A positional accuracy study of a micro-EDM machine
    Almond, H
    Bhogal, J
    Allen, DM
    DESIGN, TEST, AND MICROFABRICATION OF MEMS AND MOEMS, PTS 1 AND 2, 1999, 3680 : 1113 - 1124
  • [46] Experimental Study of Micro-EDM Precision Milling
    Zhang, Liaoyuan
    Ma, Kangle
    Geng, Yue
    Zhao, Yan
    PROCEEDINGS OF THE 2015 4TH INTERNATIONAL CONFERENCE ON SUSTAINABLE ENERGY AND ENVIRONMENTAL ENGINEERING, 2016, 53 : 686 - 691
  • [47] Study on the micro-EDM processing characteristics of Ti-6Al-4V alloy with different electrode materials
    Sheng-gui Chen
    Man-qun Lian
    Xiao-yu Wu
    Jian-guo Lei
    Hang Zhao
    Tai-jiang Peng
    Feng Luo
    Jun Yang
    Bin Xu
    The International Journal of Advanced Manufacturing Technology, 2021, 116 : 3369 - 3376
  • [48] Experimental Study on Dry Micro-EDM Using Different Blowing Mode
    Li, L. Q.
    Zhu, G. Z.
    Bai, J. J.
    PROCEEDINGS OF THE 16TH INTERNATIONAL SYMPOSIUM ON ELECTROMACHINING, 2010, 2010, : 603 - 606
  • [49] Fabrication of micro ball joint by using micro-EDM and electroforming
    Lin, Chang-Sheng
    Liao, Yunn-Shiuan
    Cheng, Yi-Ting
    Lai, Yunn-Cheng
    MICROELECTRONIC ENGINEERING, 2010, 87 (5-8) : 1475 - 1478
  • [50] Migration of Materials during Finishing Micro-EDM of Tungsten Carbide
    Jahan, Muhammad Pervej
    Rahman, Mustafizur
    Wong, Yoke San
    ADVANCES IN MATERIALS PROCESSING IX, 2010, 443 : 681 - 686
12345