STUDY ON DEEP-HOLE BORING BY BTA-SYSTEM SOLID BORING TOOL - BEHAVIOR OF TOOL AND ITS EFFECTS ON PROFILE OF MACHINED HOLE

被引：0
|
作者：
SAKUMA, K [1 ]
TAGUCHI, K [1 ]
KATSUKI, A [1 ]
机构：
[1] ARIAKE TECH COLL,OMUTA 836,JAPAN
来源：
BULLETIN OF THE JAPAN SOCIETY OF PRECISION ENGINEERING | 1980年 / 14卷 / 03期
关键词：
BORING;
D O I：
暂无
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
The effects of tool vibration on the hole profile in deep drilling are examined by analyzing the vibration with respect to frequency. Further, the mechanism and the causes of formation of multicorner shape in holes with a high length-to-diameter ratio are discussed. It is concluded that the frequency of the bending vibration of the boring bar during machining of the holes corresponds to the number of the corners of holes. From the fact that pentagonal shaped holes are produced frequently, the BTA system solid boring tool is supposed to behave like the equally spaced four-cutting-edge tool. This behavior is clarified through measuring the movements of the boring bar axis. The forming of multicorner-shaped hole itself may be due to a kind of self-excited vibration which is induced by the vibratory movements of the tool axis.
引用
收藏
页码：143 / 148
页数：6
相关论文
共 40 条
  • [21] Whirling motion in BTA deep hole boring-workpiece system subjected to cutting forces
    Al-Wedyan, H
    Bhat, RB
    Demirli, K
    ADVANCES IN DYNAMICS, INSTRUMENTATION AND CONTROL, 2004, : 461 - 470
  • [22] The hole profile and tool wear of BTA deep hole drilling for SUS 316 marine part material
    Sim, SB
    Kim, CO
    PROCEEDINGS OF THE NINTH (1999) INTERNATIONAL OFFSHORE AND POLAR ENGINEERING CONFERENCE, VOL IV, 1999, 1999, : 154 - 161
  • [23] Simulation study on the variation pattern of tool-chip contact length in the BTA deep-hole drilling process
    1600, Editura Politechnica (15):
  • [24] Experimental and analytical analyses of the cutting process in the deep hole drilling with BTA (Boring Trepanning Association) system
    Thil, J.
    Haddag, B.
    Nouari, M.
    Barlier, C.
    Papillon, L.
    MECHANICS & INDUSTRY, 2013, 14 (06) : 413 - 429
  • [25] STUDY ON DEEP-HOLE DRILLING OF HEAT EXCHANGER TUBE PLATE - DRILLING OF STACKED PLATES BY BTA TOOL.
    Kakita, Hiroshi
    Minami, Kohjiro
    Yoneda, Mitsuo
    Sato, Takuro
    Komura, Akio
    Honda, Shoichi
    Hitachi Zosen Technical Review, 1984, 45 (03): : 37 - 45
  • [26] Development of a high-performance laser-guided deep-hole boring tool: optimal determination of reference origin for precise guiding
    Katsuki, K
    Onikura, H
    Sajima, T
    Takei, T
    Thiele, D
    PROCEEDINGS OF THE THIRTEENTH ANNUAL MEETING OF THE AMERICAN SOCIETY FOR PRECISION ENGINEERING, 1998, : 88 - 91
  • [27] Development of a high-performance laser-guided deep-hole boring tool: optimal determination of reference origin for precise guiding
    Katsuki, A
    Onikura, H
    Sajima, T
    Takei, T
    Thiele, D
    PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 2000, 24 (01): : 9 - 14
  • [28] A STUDY ON THE TOOL EIGENPROPERTIES OF A BTA DEEP HOLE DRILL - THEORY AND EXPERIMENTS
    CHIN, JH
    LEE, LW
    INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 1995, 35 (01): : 29 - 49
  • [29] Development of a high-performance laser-guided deep-hole boring tool - A new model for application, and a robot and a probe for extremely deep holes
    Katsuki, A
    Onikura, H
    Sajima, T
    Thiele, D
    PRECISION ENGINEERING, NANOTECHNOLOGY, VOL 1, PROCEEDINGS, 1999, : 254 - 257
  • [30] Optimization of machining performance in deep hole boring: A study on cutting tool vibration and dynamic vibration absorber design
    Li, L.
    Yang, D. L.
    Cui, Y. M.
    ADVANCES IN PRODUCTION ENGINEERING & MANAGEMENT, 2023, 18 (03): : 371 - 380
1234