LOCAL FORCES IN THE CONTACT AREA BETWEEN SYNTHETIC WHEEL AND STEEL RAIL

被引：0
|
作者：
MOHLER, P
机构：
来源：
FORSCHUNG IM INGENIEURWESEN-ENGINEERING RESEARCH | 1995年 / 61卷 / 03期
关键词：
D O I：
10.1007/BF02601414
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
This paper shows the normal pressure and tangential shear stress in the contact surface between wheel and rail. A measurement system has been developed to measure the contact stresses. Synthetic wheels with a much lower modulus of elasticity than steel wheels are suitable for determining local forces experimentally. Contact measurements can thus be obtained to the nearest centimeter with relatively low normal forces. The theoretical results of the normal pressure and tangential shear stress are calculated with the theory of Hertz 1 , Bufler 2 , Kalker 3 and Wang/Knothe 4 .
引用
收藏
页码：29 / 41
页数：13
相关论文
共 50 条
  • [31] An application of the interactive multiple model to the measurement of wheel-rail contact forces
    Bionda, S.
    Di Gialleonardo, E.
    Cazzulani, G.
    Braghin, F.
    DYNAMICS OF VEHICLES ON ROADS AND TRACKS, 2016, : 1145 - 1153
  • [32] NOISE GENERATION IN RAILWAY WHEELS DUE TO RAIL-WHEEL CONTACT FORCES
    SCHNEIDER, E
    POPP, K
    IRRETIER, H
    JOURNAL OF SOUND AND VIBRATION, 1988, 120 (02) : 227 - 244
  • [33] Track dynamic behaviour caused by high frequency rail/wheel contact forces
    Miura, S
    Ishida, M
    INTERNATIONAL RAILWAY CONFERENCE ON BETTER JOURNEY TIME - BETTER BUSINESS: SELECTED PAPERS PRESENTED AT S TECH '96, 1996, 1996 (08): : 199 - 206
  • [34] Damage Evaluation of Wheel Tread based on Contact Position between Wheel and Rail
    Kwon, Seok-Jin
    Lee, Dong-Hyung
    Seo, Jung-Won
    Ham, Young-Sam
    ADVANCES IN FRACTURE AND DAMAGE MECHANICS VIII, 2010, 417-418 : 645 - 648
  • [35] Continuous observation of wheel/rail contact forces in curved track and theoretical considerations
    Matsumoto, Akira
    Sato, Yasuhiro
    Ohno, Hiroyuki
    Shimizu, Makoto
    Kurihara, Jun
    Tomeoka, Masao
    Saitou, Takuya
    Michitsuji, Yohei
    Tanimoto, Masuhisa
    Sato, Yoshi
    Mizuno, Masaaki
    VEHICLE SYSTEM DYNAMICS, 2012, 50 : 349 - 364
  • [36] A new measuring method of wheel-rail contact forces and related considerations
    Matsumoto, Akira
    Sato, Yasuhiro
    Ohno, Hiroyuki
    Tomeoka, Masao
    Matsumoto, Kosuke
    Kurihara, Jun
    Ogino, Tomohisa
    Tanimoto, Masuhisa
    Kishimoto, Yasushi
    Sato, Yoshi
    Nakai, Takuji
    WEAR, 2008, 265 (9-10) : 1518 - 1525
  • [37] Ultrasonic measurements of nominal contact area and contact pressure in a wheel-rail system
    Pau, M
    Aymerich, F
    Ginesu, F
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART F-JOURNAL OF RAIL AND RAPID TRANSIT, 2000, 214 (04) : 231 - 243
  • [38] The influences of rail vibration absorber on normal wheel-rail contact forces due to multiple wheels
    Liu, Haiping
    Yang, Jianzhong
    Wu, Tianxing
    JOURNAL OF VIBRATION AND CONTROL, 2015, 21 (02) : 275 - 284
  • [39] THE AVAILABLE METHODS TO CALCULATE THE WHEEL RAIL FORCES IN NON-HERTZIAN CONTACT PATCHES AND RAIL DAMAGING
    PASCAL, JP
    SAUVAGE, G
    VEHICLE SYSTEM DYNAMICS, 1993, 22 (3-4) : 263 - 275
  • [40] The influence of rail surface irregularities on contact forces and local stresses
    Andersson, Robin
    Torstensson, Peter T.
    Kabo, Elena
    Larsson, Fredrik
    VEHICLE SYSTEM DYNAMICS, 2015, 53 (01) : 68 - 87
12345