Wedge splitting test method: quantification of influence of glued marble plates by two-parameter fracture mechanics

被引：4

作者：

Seitl, S. ^{[1
,2
]}

Garcia, B. Nieto ^{[1
,3
]}

Merta, I. ^{[4
]}

机构：

[1] VVI Inst Phys Mat, Acad Sci Czech Republ, Brno, Czech Republic

[2] Brno Univ Technol, Fac Civil Engn, Inst Struct Mech, Brno, Czech Republic

[3] Univ Oviedo, Dept Construct & Mfg Engn Campus Viesques, Gijon, Spain

[4] Univ Technol Vienna, Fac Civil Engn, Inst Bldg Construct & Technol, Vienna, Austria

来源：

FRATTURA ED INTEGRITA STRUTTURALE | 2014年 / Gruppo Italiano Frattura卷 / 30期

关键词：

Wedge splitting test; Stress intensity factor; T-stress; K-calibration curves; Concrete fracture test;

D O I：

10.3221/IGF-ESIS.30.23

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

In the present paper, the well-known wedge splitting test (WST) is applied on specimens with different geometries (S= 150, 200, 300 mm) and variants of the specimens' configurations. K-calibration (B-1) and T-stress (B-2) calibration curves for such specimens are introduced. The objective was to compare and discuss the values of the calibration curves dependent on the specimen's geometries and on three different specimens' configurations: homogenous specimen; specimen with marble plates forming the groove for load application and specimen with glued marble plates.

引用

页码：174 / 181

页数：8

共 50 条

[31] Fracture energy of coarse recycled aggregate concrete using the wedge splitting test method: influence of water-reducing admixtures
J. García-González
T. Barroqueiro
L. Evangelista
J. de Brito
N. De Belie
J. Morán-del Pozo
A. Juan-Valdés
Materials and Structures, 2017, 50
[32] Fracture energy of coarse recycled aggregate concrete using the wedge splitting test method: influence of water-reducing admixtures
Garcia-Gonzalez, J.
Barroqueiro, T.
Evangelista, L.
de Brito, J.
De Belie, N.
Moran-del Pozo, J.
Juan-Valdes, A.
MATERIALS AND STRUCTURES, 2017, 50 (02)
[33] Large deflection analysis of rectangular plates on two-parameter elastic foundation by the boundary strip method
Horibe, T
Asano, N
JSME INTERNATIONAL JOURNAL SERIES A-SOLID MECHANICS AND MATERIAL ENGINEERING, 2001, 44 (04) : 483 - 489
[34] Numerical simulation of wedge splitting test method for evaluating fracture behaviour of self compacting concrete
Rajeshwari, B. Raja
Sivakumar, M. V. N.
Asrith, P. Sai
COMPUTERS AND CONCRETE, 2024, 33 (03): : 265 - 273
[35] Anomalies concerned with interpreting fatigue data from two-parameter crack growth rate relation in fracture mechanics
Sih, G. C.
THEORETICAL AND APPLIED FRACTURE MECHANICS, 2008, 50 (02) : 142 - 156
[36] On the m-step two-parameter generalized Hermitian and skew-Hermitian splitting preconditioning method
Bastani M.
Salkuyeh D.K.
Afrika Matematika, 2017, 28 (7-8) : 999 - 1010
[37] Investigation of the Isotropic Plates Bending Lying on the Complex Two-parameter Elastic Foundation by Boundary Element Method
Velikanov, P. G.
IZVESTIYA SARATOVSKOGO UNIVERSITETA NOVAYA SERIYA-MATEMATIKA MEKHANIKA INFORMATIKA, 2008, 8 (01): : 36 - 42
[38] Analysis of Rectangular Plates on Resting Winkler and Two-Parameter Elastic Foundation Models by Finite Difference Method
Trong Ha Nguyen
ENGINEERING TECHNOLOGY & APPLIED SCIENCE RESEARCH, 2019, 9 (04) : 4490 - 4494
[39] Two-parameter fracture mechanics and circumferential crack growth in surface cracked pipelines using line-spring elements
Berg, E.
Skallerud, B.
Thaulow, C.
ENGINEERING FRACTURE MECHANICS, 2008, 75 (01) : 17 - 30
[40] Experimental method for determining the fracture toughness of concrete based on the modified two-parameter model and DIC technique
Qing, Longbang
Cao, Guorui
Guan, Junfeng
Li, Shuguang
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2022, 45 (02) : 400 - 410

← 1 2 3 4 5 →