Wedge splitting test method: quantification of influence of glued marble plates by two-parameter fracture mechanics

被引：4
|
作者：
Seitl, S. [1 ,2 ]
Garcia, B. Nieto [1 ,3 ]
Merta, I. [4 ]
机构：
[1] VVI Inst Phys Mat, Acad Sci Czech Republ, Brno, Czech Republic
[2] Brno Univ Technol, Fac Civil Engn, Inst Struct Mech, Brno, Czech Republic
[3] Univ Oviedo, Dept Construct & Mfg Engn Campus Viesques, Gijon, Spain
[4] Univ Technol Vienna, Fac Civil Engn, Inst Bldg Construct & Technol, Vienna, Austria
来源：
FRATTURA ED INTEGRITA STRUTTURALE | 2014年 / Gruppo Italiano Frattura卷 / 30期
关键词：
Wedge splitting test; Stress intensity factor; T-stress; K-calibration curves; Concrete fracture test;
D O I：
10.3221/IGF-ESIS.30.23
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In the present paper, the well-known wedge splitting test (WST) is applied on specimens with different geometries (S= 150, 200, 300 mm) and variants of the specimens' configurations. K-calibration (B-1) and T-stress (B-2) calibration curves for such specimens are introduced. The objective was to compare and discuss the values of the calibration curves dependent on the specimen's geometries and on three different specimens' configurations: homogenous specimen; specimen with marble plates forming the groove for load application and specimen with glued marble plates.
引用
收藏
页码：174 / 181
页数：8
相关论文
共 50 条
  • [1] Fracture mechanics of marble using a splitting tension test
    Celestino, T
    Piltner, R
    Monteiro, PJM
    Ostertag, CP
    JOURNAL OF MATERIALS IN CIVIL ENGINEERING, 2001, 13 (06) : 407 - 411
  • [2] Two-parameter fracture mechanical analysis of a near-crack-tip stress field in wedge splitting test specimens
    Seitl, Stanislav
    Vesely, Vaclav
    Routil, Ladislav
    COMPUTERS & STRUCTURES, 2011, 89 (21-22) : 1852 - 1858
  • [3] Two-parameter fracture mechanics in contemporary strength problems
    Matvienko Y.G.
    Journal of Machinery Manufacture and Reliability, 2013, 42 (05) : 374 - 381
  • [4] THE WEDGE SPLITTING TEST, A NEW METHOD OF PERFORMING STABLE FRACTURE-MECHANICS TESTS
    BRUHWILER, E
    WITTMANN, FH
    ENGINEERING FRACTURE MECHANICS, 1990, 35 (1-3) : 117 - 125
  • [5] Quantification of the effect of specimen geometry on the fatigue crack growth response by two-parameter fracture mechanics
    Hutar, P
    Seitl, S
    Knésl, Z
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2004, 387 : 491 - 494
  • [6] Method for the analysis of plates on a two-parameter foundation
    Istanbul Technical Univ, Istanbul, Turkey
    Int J Solids Struct, 19 (2891-2915):
  • [7] A method for the analysis of plates on a two-parameter foundation
    Çelik, M
    Saygun, A
    INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 1999, 36 (19) : 2891 - 2915
  • [8] Fracture prediction of solder joints using two-parameter fracture mechanics
    Mirmehdi, Sadegh
    Nourani, Amir
    Assempour, Ahmad
    ENGINEERING FRACTURE MECHANICS, 2023, 293
  • [9] Two-parameter fracture prediction for cracked plates under bending
    Xiao, J. Y.
    Wang, G. Z.
    Wang, Y. H.
    Tu, S. T.
    Xuan, F. Z.
    ENGINEERING FRACTURE MECHANICS, 2021, 255
  • [10] The Two-Parameter Approach for Fracture Mechanics: Some Industrial Applications
    Meliani, M. Hadj
    Bouledroua, O.
    Ould-M'beirick, M.
    El-miloudi, K.
    Neggaz, Dj.
    Nateche, T.
    El-azzizi, A.
    Bokort, H.
    Houari, F.
    Pluvinage, Guy
    FRACTURE AT ALL SCALES, 2017, : 105 - 134
12345