OPTIMUM STEAM PRETREATING TECHNIQUE OF CHIPS FOR MANUFACTURING OF PARTICLEBOARDS

被引：2
|
作者：
CAI, LP
WANG, FF
LI, JA
机构：
[1] Northeast Forestry University, Harbin
来源：
HOLZ ALS ROH-UND WERKSTOFF | 1995年 / 53卷 / 01期
关键词：
D O I：
10.1007/BF02716379
中图分类号：
TB3 [工程材料学]; TS [轻工业、手工业、生活服务业];
学科分类号：
0805 ; 080502 ; 0822 ;
摘要：
Highly dimensionally stable wood based particleboards were produced by pretreated chips with saturated steam at elevated pressures. In this work, the wood chips ofbirch (B. Platyphylla) were used and determination of optimum steam pressure and steam pretreating time were formulated as a constrained non-linear programming problem. The results showed that the optimum technique parameters for steam pretreating birch chips were about 1.275 MPa in steam pressure and 6 min. in steam pretreating time.
引用
收藏
页码：21 / 23
页数：3
相关论文
共 50 条
  • [31] Flash Drying of Wood Chips in Superheated Steam
    Fyhr, C.
    Rasmuson, A.
    AIChE Symposium Series, 1996, (311):
  • [32] Cleaner Chips: Decarbonization in Semiconductor Manufacturing
    Nagapurkar, Prashant
    Nandy, Paulomi
    Nimbalkar, Sachin
    SUSTAINABILITY, 2024, 16 (01)
  • [33] THE TECHNOLOGICAL INVESTIGATIONS OF MANUFACTURING OF ENERGY CHIPS
    Miklasevics, Ziedonis
    ENVIRONMENT, TECHNOLOGY, RESOURCES, PROCEEDINGS OF THE 8TH INTERNATIONAL SCIENTIFIC AND PRACTICAL CONFERENCE, 2011, VOL I, 2011, : 220 - 229
  • [34] CHIPS Act Will Boost Semiconductor Manufacturing
    Sprovieri, John
    Assembly, 2022, 65 (10):
  • [35] Additive manufacturing of microfluidic glass chips
    Kotz, F.
    Helmer, D.
    Rapp, B. E.
    MICROFLUIDICS, BIOMEMS, AND MEDICAL MICROSYSTEMS XVI, 2018, 10491
  • [36] Optimum surface area distribution of multiple-effect evaporator for minimizing steam use in raw sugar manufacturing
    Chantasiriwan S.
    Chemical Engineering Transactions, 2017, 61 : 805 - 810
  • [37] On the optimum operating temperature for steam floods
    Kazeem A. Lawal
    Olugbenga Olamigoke
    SN Applied Sciences, 2021, 3
  • [38] SELECTING OPTIMUM STEAM LINE SIZE
    GANAPATHY, V
    OIL & GAS JOURNAL, 1980, 78 (51) : 86 - &
  • [39] On the optimum operating temperature for steam floods
    Lawal, Kazeem A.
    Olamigoke, Olugbenga
    SN APPLIED SCIENCES, 2021, 3 (01):
  • [40] PROPERTIES OF 3-LAYER ORIENTED PARTICLEBOARDS FROM SUGI THINNINGS AND LAUAN VENEER CHIPS
    SAITO, F
    IKEDA, M
    TSUCHIYA, H
    MOKUZAI GAKKAISHI, 1987, 33 (01): : 19 - 24
12345