EXPERIMENTAL RESULTS ON Nb 25 WT.% Ta 45 WT.% Ti SUPERCONDUCTING WIRE

被引:3
|
作者
Liu, H. [1 ]
Gregory, E. [1 ]
Rizzo, N. D. [2 ]
McCambridge, J. D. [2 ]
Ling, X. S. [2 ]
Prober, D. E. [2 ]
机构
[1] IGC Adv Superconductors Inc, 1875 Thomaston Ave, Waterbury, CT 06704 USA
[2] Yale Univ, Dept Appl Phys, New Haven, CT 06520 USA
关键词
D O I
10.1109/77.233649
中图分类号
TM [电工技术]; TN [电子技术、通信技术];
学科分类号
0808 ; 0809 ;
摘要
Several small billets with NbTi binary and Nb 25 wt.% Ta 45 wt.% Ti ternary alloy filaments were made and fabricated into fine wire after subjecting the alloys to different treatment conditions. J(c) results at 4.2 K and 1.8 K from binary and ternary materials, which were prepared under the identical conditions, are compared. The results of an alpha-Ti precipitation study on the two alloys are also presented. The J(c) results are compared with those from some earlier work on a Nb 15 wt.% Ta 44 wt.% Ti (1) material.
引用
收藏
页码:1350 / 1353
页数:4
相关论文
共 50 条
  • [21] Structure and corrosion of Al-40 wt.% Nb-2 wt.% X alloys rapidly solidified from the melt
    Layachi, F.
    Debili, M. Y.
    JOURNAL OF APPLIED ELECTROCHEMISTRY, 2022, 52 (08) : 1259 - 1273
  • [22] Grain Characteristics and Mechanical Properties of Bioinert Ti-40 wt. % Nb Alloy
    Zhu, Qifang
    Sharkeev, Yurii
    Eroshenk, Anna
    Sun Zeming
    Zhang, Hongju
    Han, Xiaole
    Glukhov, Ivan
    Mairambekova, Aikol
    Khimch, Margarita
    PROCEEDINGS OF THE INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS WITH HIERARCHICAL STRUCTURE FOR NEW TECHNOLOGIES AND RELIABLE STRUCTURES 2019, 2019, 2167
  • [23] Dissolution Behavior of Cu-2.0 wt.% Be (Alloy 25) and Cu-0.1 wt.% Fe (C19210) Substrates in Molten Sn-9 wt.%Zn Solder
    Laksono, Andromeda Dwi
    Shen, Yu-An
    Chen, Ting
    Yen, Yee-Wen
    JOM, 2024, 76 (06) : 2754 - 2762
  • [24] Characteristic Features of Ultrafine-Grained Ti-45 wt.% Nb Alloy under High Cycle Fatigue
    Mairambekova, Aikol M.
    Eroshenko, Anna Y.
    Oborin, Vladimir A.
    Bannikov, Mikhail, V
    Chebodaeva, Valentina V.
    Terekhina, Alena, I
    Naimark, Oleg B.
    Dmitriev, Andrey, I
    Sharkeev, Yurii P.
    MATERIALS, 2021, 14 (18)
  • [25] Interaction of Ti–6 wt.% Si alloy with tissue fluid: experimental modeling
    V. A. Lavrenko
    V. N. Talash
    V. V. Lashneva
    N. N. Kuz’menko
    M. A. Krasovskii
    Powder Metallurgy and Metal Ceramics, 2010, 49 : 94 - 98
  • [26] Dissolution Behavior of Cu-2.0 wt.% Be (Alloy 25) and Cu-0.1 wt.% Fe (C19210) Substrates in Molten Sn-9 wt.%Zn Solder
    Andromeda Dwi Laksono
    Yu-An Shen
    Ting Chen
    Yee-Wen Yen
    JOM, 2024, 76 : 2754 - 2762
  • [27] DEVELOPMENT OF NB44WT-PERCENT-TI 25WT-PERCENT-TA BASED SUPERCONDUCTING CONDUCTORS FOR LHC MAGNETS
    HOANG, GK
    BRUZEK, CE
    OBERLI, L
    LEROY, D
    IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 1995, 5 (02) : 412 - 415
  • [28] Experimental and thermodynamic study of nickel (30 wt.%Cr) - based alloys containing between 2.5 and 5.0 wt.% carbon
    Berthod, Patrice
    Souaillat, Elise
    Hestin, Ophelie
    Aranda, Lionel
    INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2012, 103 (11) : 1302 - 1311
  • [29] Metallographic preparation techniques for U-6 wt.%Nb
    Kelly, A. M.
    Field, R. D.
    Thoma, D. J.
    JOURNAL OF NUCLEAR MATERIALS, 2012, 429 (1-3) : 118 - 127
  • [30] Effect of Nb content on phase transformation, microstructure of the sintered and heat-treated Ti (10-25) wt.% Nb alloys
    Mathebula, C.
    Matizamhuka, W.
    Bolokang, Amogelang S.
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2020, 108 (1-2): : 23 - 34