A STUDY OF INFLUENCE OF ELECTROLYTE COMPOSITION ON ECH OF BEVEL GEARS USING MIXTURE D-OPTIMAL DESIGN

被引：1

作者：

Misra, J. P. ^{[1
]}

Jain, P. K. ^{[1
]}

Dwivedi, D. K. ^{[1
]}

Mehta, N. K. ^{[1
]}

机构：

[1] Indian Inst Technol, Dept Mech & Ind Engn, Roorkee 247667, Uttar Pradesh, India

来源：

JOURNAL OF MECHANICAL ENGINEERING AND SCIENCES | 2014年 / 6卷

关键词：

Gear finishing; ECH; electrolyte; mixture design;

D O I：

10.15282/jmes.6.2014.3.0073

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

This paper discusses the experimental investigation to find out the optimal electrolyte composition in improving the surface quality of the gear teeth profile during surfacing finishing of bevel gears by the electrochemical honing process. In this study, AISI 1040 was used as the workpiece material, mixtures of sodium chloride and sodium nitrate in different ratios were used as the input parameter, and the percentage improvement in the surface roughness and material removal rate of the process were used as measures of process performance. The experimental runs were designed according to the Mixture D-Optimal design. The analysis of the experimental outcome was carried out and 80% NaCl + 20% NaNO3 was found to be theoptimal electrolyte composition to conduct the confirmation experiments. The finding of the study establishes the process for precision finishing of bevel gears.

引用

页码：753 / 761

页数：9

共 50 条

[41] Application of D-optimal Mixture Design for Development and Optimization of Olmesartan Medoxomil Loaded SMEDDS
Gahlawat, Navdeep
Verma, Ravinder
Kaushik, Deepak
CURRENT DRUG THERAPY, 2020, 15 (05) : 548 - 560
[42] Using a d-optimal mixture design to study the thermal properties of short glass fiber- and polytetrafluoroethylene-reinforced polycarbonate composites
Hsin-Te Liao
Chorng-Jyh Tzeng
Yung-Kuang Yang
Yung-Chih Li
Chih-Hung Tsai
Neural Computing and Applications, 2014, 24 : 833 - 844
[43] Using a d-optimal mixture design to study the thermal properties of short glass fiber- and polytetrafluoroethylene-reinforced polycarbonate composites
Liao, Hsin-Te
Tzeng, Chorng-Jyh
Yang, Yung-Kuang
Li, Yung-Chih
Tsai, Chih-Hung
NEURAL COMPUTING & APPLICATIONS, 2014, 24 (3-4): : 833 - 844
[44] APPLICATION OF D-OPTIMAL MIXTURE DESIGN AND ARTIFICIAL NEURAL NETWORK IN OPTIMIZING THE COMPOSITION OF FLOURS FOR PREPARATION OF GLUTEN-FREE BREAD
Pradhan, Dileshwar
Hoque, Monjurul
Singh, Sushil Kumar
Dwivedi, Madhuresh
JOURNAL OF MICROBIOLOGY BIOTECHNOLOGY AND FOOD SCIENCES, 2021, 11 (02): : 1 - 10
[45] Optimization of the sintering of Aurivillius phases using D-optimal statistical design
Peterson, MS
Misture, ST
SOLID STATE IONICS-2002, 2003, 756 : 485 - 489
[46] Formulation and Hardness Evaluation of Tablets Containing Citrus limon and Hylocereus polyrhizus Powder using D-Optimal Mixture Design
Abd Manan, Ezzah
Abd Gani, Siti Salwa
Zaidan, Uswatun Hasanah
Halmi, Mohd Izuan Effendi
SAINS MALAYSIANA, 2022, 51 (10): : 3347 - 3357
[47] Development and optimization of a self-microemulsifying drug delivery system for atorvastatin calcium by using D-optimal mixture design
Yeom, Dong Woo
Song, Ye Seul
Kim, Sung Rae
Lee, Sang Gon
Kang, Min Hyung
Lee, Sangkil
Choi, Young Wook
INTERNATIONAL JOURNAL OF NANOMEDICINE, 2015, 10 : 3865 - 3878
[48] Optimization of the fabrication of novel stealth PLA-based nanoparticles by dispersion polymerization using D-optimal mixture design
Adesina, Simeon K.
Wight, Scott A.
Akala, Emmanuel O.
DRUG DEVELOPMENT AND INDUSTRIAL PHARMACY, 2014, 40 (11) : 1547 - 1556
[49] Formulation and Optimization of Captopril Sublingual Tablet Using D-Optimal Design
Bolourtchian, Noushin
Hadidi, Naghmeh
Foroutan, Seyed Mohsen
Shafaghi, Bijan
IRANIAN JOURNAL OF PHARMACEUTICAL RESEARCH, 2008, 7 (04): : 259 - 267
[50] Load Reconstruction Technique Using D-Optimal Design and Markov Parameters
Gupta, Deepak K.
Dhingra, Anoop K.
SHOCK AND VIBRATION, 2015, 2015

← 1 2 3 4 5 →