A STATISTICAL STUDY OF THE ROLE OF MOLYBDENUM IN THE PITTING RESISTANCE OF STAINLESS-STEELS

被引：35

作者：

LEMAITRE, C ^{[1
]}

MONEIM, AA ^{[1
]}

DJOUDJOU, R ^{[1
]}

BAROUX, B ^{[1
]}

BERANGER, G ^{[1
]}

机构：

[1] CTR RECH UGINE,F-73400 UGINE,FRANCE

来源：

CORROSION SCIENCE | 1993年 / 34卷 / 11期

关键词：

D O I：

10.1016/0010-938X(93)90027-E

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The local breakdown of passive films grown on stainless steels in the presence of chloride ions generally leads to pitting. To study this phenomenon, the pitting potential of several stainless steels in neutral chloride media has been determined, by a statistical technique. This parameter is obtained when the statistical pit generation rate corresponds to a preset critical value. Two cases were considered: (a) stainless steels without alloyed Mo (AISI 430 or 304) in NaCl or NaCl + Na2MoO4, aerated or de-aerated, solutions, and (b) Mo alloyed stainless steels (AISI 434 or 316) in NaCl aerated or de-aerated solutions. The experimental results are compared, and discussed in terms of the influence of alloyed or dissolved molybdenum. It appears that the role of this element is different in each case, and also that dissolved oxygen in the solution plays a significant role in the improvement of the passivity due to molybdate ions action.

引用

页码：1913 / 1922

页数：10

共 50 条

[21] PITTING CORROSION OF DUPLEX STAINLESS-STEELS
SRIRAM, R
TROMANS, D
CORROSION, 1989, 45 (10) : 804 - 810
[22] PITTING OF STAINLESS-STEELS BY THIOSULFATE IONS
NEWMAN, RC
WONG, WP
EZUBER, H
GARNER, A
CORROSION, 1989, 45 (04) : 282 - 287
[23] THIOSULFATE PITTING OF AUSTENITIC STAINLESS-STEELS
GARNER, A
CIM BULLETIN, 1988, 81 (914): : 70 - 70
[24] SYNERGISM OF ALLOYING ELEMENTS AND PITTING CORROSION-RESISTANCE OF STAINLESS-STEELS
LU, YC
IVES, MB
CLAYTON, CR
CORROSION SCIENCE, 1993, 35 (1-4) : 89 - 96
[25] PITTING CORROSION-RESISTANCE OF SILICON-IMPLANTED STAINLESS-STEELS
BASZKIEWICZ, J
KAMINSKI, M
PODGORSKI, A
JAGIELSKI, J
GAWLIK, G
CORROSION SCIENCE, 1992, 33 (05) : 815 - 818
[26] PITTING RESISTANCE OF HIGH CR HIGH NI AUSTENITIC STAINLESS-STEELS
YOSHII, T
NISHIKAWA, M
KAWAMURA, S
TRANSACTIONS OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1976, 16 (09) : 481 - 485
[27] PITTING CORROSION-RESISTANCE OF NITROGEN BEARING DUPLEX STAINLESS-STEELS
MISAO, H
TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1987, 73 (05): : S623 - S623
[28] CONCERNING THE PITTING RESISTANCE OF N AND MO DOPED AUSTENITIC STAINLESS-STEELS
KOLCHIN, GG
ERMAKOV, BS
PROTECTION OF METALS, 1988, 24 (06): : 779 - 780
[29] The role of alloyed molybdenum in the inhibition of pitting corrosion in stainless steels
Ilevbare, GO
Burstein, GT
CORROSION SCIENCE, 2001, 43 (03) : 485 - 513
[30] PITTING POTENTIAL OF STAINLESS-STEELS IN ARTIFICIAL SWEAT
RANDIN, JP
WERKSTOFFE UND KORROSION-MATERIALS AND CORROSION, 1987, 38 (04): : 175 - 183

← 1 2 3 4 5 →