CHARACTERIZATION OF THE FRACTURE-TOUGHNESS PROPERTY (G1C) OF COMPOSITE LAMINATES USING THE DOUBLE CANTILEVER BEAM SPECIMEN

被引：10

|

作者：

LEE, S

GAUDERT, PC

DAINTY, RC

SCOTT, RF

机构：

来源：

POLYMER COMPOSITES | 1989年 / 10卷 / 05期

关键词：

D O I：

10.1002/pc.750100506

中图分类号：

TB33 [复合材料];

学科分类号：

摘要：

引用

收藏

页码：305 / 312

页数：8

相关论文

共 50 条

[41] Analysis of the adhesively bonded composite double cantilever beam specimen with emphasis on bondline constraint, adherend through-thickness flexibility and fracture process zone relative size
de Morais, A. B.
JOURNAL OF ADHESION, 2024, 100 (06): : 468 - 491
[42] A Study on Fracture Property of Adhesive Interface at Tapered Double Cantilever Beam with Inhomogeneous Composite Material due to Loading Conditions of In-plane and Out-plane
Lee, Jung-Ho
Kim, Jae-Won
Cheon, Seong-Sik
Cho, Jae-Ung
COMPOSITES RESEARCH, 2020, 33 (06): : 401 - 407
[43] Fracture mechanics approach to the evaluation of strength of adhesive joints (1st report, fracture toughness of double-cantilever beam and single-lap adhesive joint specimens)
Chung, Nam-Yong
Yuuki, Ryoji
Ishikawa, Haruo
Nakano, Shizuka
1895, (54):
[44] Determination and influential factors of fracture toughness in unidirectional laminated bamboo-composite using double cantilever beams and single-edge notched bend tests
Wu, Yao
Wan, Zhichao
Li, Zhi
MATERIALS TODAY COMMUNICATIONS, 2022, 33
[45] TAPERED DOUBLE CANTILEVER BEAM FRACTURE TESTS OF PHENOLIC-WOOD ADHESIVE JOINTS .1. DEVELOPMENT OF SPECIMEN GEOMETRY - EFFECTS OF BONDLINE THICKNESS, WOOD ANISOTROPY AND CURE TIME ON FRACTURE ENERGY
EBEWELE, R
RIVER, B
KOUTSKY, J
WOOD AND FIBER, 1979, 11 (03): : 197 - 213
[46] FRACTURE-TOUGHNESS OF TIB2 AND B4C USING THE SINGLE-EDGE PRECRACKED BEAM, INDENTATION STRENGTH, CHEVRON-NOTCHED BEAM, AND INDENTATION STRENGTH METHODS
CONZONE, SD
BLUMENTHAL, WR
VARNER, JR
JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 1995, 78 (08) : 2187 - 2192
[47] Mode I interlaminar fracture toughness of two-dimensional continuous fiber reinforced ceramic matrix composites using wedge-loaded double cantilever beam method
Shi, Weigang
Zhang, Chao
Wang, Bo
Li, Mei
Zhang, Chengyu
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2023, 168
[48] Double cantilever-beam test comparisons of Mode I fracture toughness of adherends bonded using DP8010 and DP8005 acrylic-based adhesives
Kim, Hyun-Bum
Naito, Kimiyoshi
Oguma, Hiroyuki
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 2018, 82 : 173 - 183
[49] STUDY OF RUBBER-MODIFIED BRITTLE EPOXY SYSTEMS .1. FRACTURE-TOUGHNESS MEASUREMENTS USING THE DOUBLE-NOTCH 4-POINT-BEND METHOD
SUE, HJ
POLYMER ENGINEERING AND SCIENCE, 1991, 31 (04): : 270 - 274
[50] High strain rate behavior, transformation-induced plasticity and fracture toughness characterization of cast and additionally tempered Fe85Cr4Mo8V2C1 alloy manufactured using a rapid solidification technique
M. Rüssel
S. Martin
L. Krüger
W. Kreuzer
Journal of Materials Science, 2012, 47 : 6915 - 6928

← 1 2 3 4 5 →