ATM TRANSPORT WITH DYNAMIC CAPACITY CONTROL FOR INTERCONNECTION OF PRIVATE NETWORKS

This paper deals with methods for interconnection between two local private networks that are geographically separated. A scheme is first presented to chain low bit-rate physical circuits into one logical circuit, over which ATM cells are transmitted as if there is one circuit with a high bit-rate capacity. In particular, use of existing low bit-rate circuits, e.g., 384/1536 kbit/s PDH leased line services and N-ISDN switched channels, is cortsidered. The paper discusses two methods to permit chaining of physical circuits, and identifies their advantages and applications. By using the ATM-based circuit-chaining method, dynamic capacity control of the interconnection is then introduced with the use of an ATM-based rate adaptation. This is intended to provide a flexible and cost-effective capacity control compared to the existing TDM-based control. It is also possible to realize non-stop operation of changing capacity by establishment and release of chained circuits, which will lead to high reliability and robustness of private networks. Finally, delay characteristics introduced by the method are evaluated based on a computer simulation which ves a short and acceptable delay.