IMPROVEMENT OF MECHANICAL AND TRIBOLOGICAL PROPERTIES OF CARBON FIBER REINFORCED PEEK COMPOSITE FILLED WITH CARBON NANOTUBES

被引：0
|
作者：
Mahmoudi, Noureddine [1 ]
机构：
[1] Ctr Univ Relizane, Lab Genie Ind & Dev Durable, Bormadia 48000, Relizane, Algeria
来源：
ANNALES DE CHIMIE-SCIENCE DES MATERIAUX | 2015年 / 39卷 / 1-2期
关键词：
D O I：
10.3166/acsm.39.1-10
中图分类号：
O6 [化学];
学科分类号：
0703 ;
摘要：
The main objective of this paper is to develop high wear resistance carbon fiber reinforced polyether ether ketone (PEEK) composite with addition of multiwall carbon nanotube (MWCNT). These compounds were well mixed in a Haake batch mixer and compounded polymers were fabricated into sheets of known thickness by compression moulding. Samples were tested for wear resistance with respect to different concentration of fillers. The wear resistance properties of these samples depend on filler aspect ratio. Wear resistance of composite with 20 weight percentage of carbon fabric (CF) increases when MWCNT was introduced. This was confirmed by SEM micrographs of the worn surfaces revealing higher wear resistance with the addition of carbon nanotube Also better interfacial adhesion between carbon and vinyl ester in carbon reinforced vinyl ester composite was observed.
引用
收藏
页码：1 / 10
页数：10
相关论文
共 50 条
  • [1] The Research on the Mechanical and Tribological Properties of Carbon Fiber and Carbon Nanotube-Filled PEEK Composite
    Li, Jian
    Zhang, Liqiang Q.
    POLYMER COMPOSITES, 2010, 31 (08) : 1315 - 1320
  • [2] Tensile and tribological properties of a short-carbon-fiber-reinforced peek composite doped with carbon nanotubes
    Li, J.
    Zhang, L. Q.
    MECHANICS OF COMPOSITE MATERIALS, 2009, 45 (05) : 495 - 502
  • [3] Tensile and tribological properties of a short-carbon-fiber-reinforced peek composite doped with carbon nanotubes
    J. Li
    L. Q. Zhang
    Mechanics of Composite Materials, 2009, 45 : 495 - 502
  • [4] Carbon nanotubes and carbon fiber filled polyhexahydrotriazine composites: Assessing the tribological and mechanical properties
    Li, Xiaoqian
    Jia, Xiaohua
    Song, Haojie
    Chen, Hao
    Sun, Shaojie
    POLYMER ENGINEERING AND SCIENCE, 2025, 65 (04): : 2080 - 2092
  • [5] Mechanical and Tribological Properties of Carbon Fiber Reinforced POM Composite Filled With Maleamidic Acid Treated Carbon Nanotube
    Jian, Li
    Tang, Xiaodong
    SURFACE AND INTERFACE ANALYSIS, 2025, 57 (01) : 98 - 107
  • [6] Enhanced interfacial and mechanical properties of carbon fiber/PEEK composites by hydroxylated PEEK and carbon nanotubes
    Lyu, Hanxiong
    Jiang, Naiyu
    Li, Yingze
    Lee, HeowPueh
    Zhang, Dongxing
    COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2021, 145 (145)
  • [7] Reinforcing effect of carbon nanotubes on PEEK composite filled with carbon fibre
    Li, J.
    Zhang, L. Q.
    MATERIALS SCIENCE AND TECHNOLOGY, 2011, 27 (01) : 252 - 256
  • [8] Tribological Properties of Carbon Nanotubes-Carbon Fiber Reinforced WS2/PAI Composite Coatings
    Zhao, Dingyuan
    Liu, Sisi
    Liao, Junhui
    Fu, Bing
    Liu, Jingang
    Mocaxue Xuebao/Tribology, 2024, 44 (08): : 1125 - 1135
  • [9] The effects of adding carbon nanotubes to the mechanical and tribological properties of a carbon fibre reinforced polyether ether ketone composite
    Li, J.
    Zhang, L. Q.
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2009, 223 (11) : 2501 - 2507
  • [10] Mechanical and Tribological Properties of Solid Lubricant (PTFE) Filled Carbon Fiber Reinforced Polycarbonate Composites
    Shamsuddin, M. S. M.
    Nasir, R. M.
    Hassan, Aziz
    Ishak, Z. A. Mohd
    3RD INTERNATIONAL POSTGRADUATE CONFERENCE ON MATERIALS, MINERALS & POLYMER (MAMIP) 2019, 2020, 2267
12345