APPLICATION OF A SHAPE MEMORY ALLOY TO HAND SPLINTING

This paper describes new passive splints which have been developed using a shape memory alloy. The peculiar feature of the splints is that the way in which they change shape in use conforms to the stretching motion which it would be desirable to apply in certain conditions of deformity. The alloy consists of 55.66% by weight Nickel and 44-34% Titanium. The heat treatment of the alloy for memorising shape was implemented at 500-degrees-C for one hour. This alloy was easily bent when cool,. but the original shape was recovered on heating. It was used as the supporting structure of the reverse knuckle bender splint and the cock-up splint. The new splints could be easily attached to the deformed limb after cooling. The splints avoided the development of spasticity, because they gradually recovered their original shapes and corrected the deformities when the heat of the room or body heat warmed the splints. Since the shape memory alloy has the dual function of thermal sensor and kinetic power source it was a simple device. The splint was, as a result, small and smart. It was apparent from clinical use that the splint was easy to wear and could be worn with comfort for an extended period. The design of the splints and the fabrication process are described and their application is indicated.