The evaluation of composite resin as a posterior restorative material has been slow and attended by several problems. Gap formation has been considered a serious problem by many researchers. The purpose of this in vitro study is to compare the marginal adaptation of posterior composite resins placed by a direct method with those placed by an indirect method utilizing flexible dyes. Conclusions drawn from the results of this study are that both techniques produced marginal gaps. Also there were no differences in the width of marginal gaps in the composite resin restorations placed by our direct or indirect methods, and no marginal gap differences were observed as a result of anatomical location.
机构:Seoul Natl Univ, Sch Dent, Dept Dent Biomat Sci, Dent Res Inst, Seoul, South Korea
Woo, Si-Taek
Yu, Bin
论文数: 0引用数: 0
h-index: 0
机构:Seoul Natl Univ, Sch Dent, Dept Dent Biomat Sci, Dent Res Inst, Seoul, South Korea
Yu, Bin
Ahn, Jin-Soo
论文数: 0引用数: 0
h-index: 0
机构:Seoul Natl Univ, Sch Dent, Dept Dent Biomat Sci, Dent Res Inst, Seoul, South Korea
Ahn, Jin-Soo
Lee, Yong-Keun
论文数: 0引用数: 0
h-index: 0
机构:
Seoul Natl Univ, Sch Dent, Dept Dent Biomat Sci, Dent Res Inst, Seoul, South KoreaSeoul Natl Univ, Sch Dent, Dept Dent Biomat Sci, Dent Res Inst, Seoul, South Korea
机构:
Pontificia Univ Catolica Parana, Sch Med & Life Sci, Curitiba, PR, BrazilPontificia Univ Catolica Parana, Sch Med & Life Sci, Curitiba, PR, Brazil
Ambrosio, M. B. G.
Fahl Jr, N.
论文数: 0引用数: 0
h-index: 0
机构:
Fahl Ctr, Curtiba, PR, BrazilPontificia Univ Catolica Parana, Sch Med & Life Sci, Curitiba, PR, Brazil
Fahl Jr, N.
Silva, A. S. S.
论文数: 0引用数: 0
h-index: 0
机构:
Univ Fed Rio de Janeiro, Lab Nucl Instrumentat, Alberto Luiz Coimbra Inst Grad Studies & Res Engn, Rio De Janeiro, RJ, BrazilPontificia Univ Catolica Parana, Sch Med & Life Sci, Curitiba, PR, Brazil
Silva, A. S. S.
Lopes, R. T.
论文数: 0引用数: 0
h-index: 0
机构:
Univ Fed Rio de Janeiro, Lab Nucl Instrumentat, Alberto Luiz Coimbra Inst Grad Studies & Res Engn, Rio De Janeiro, RJ, BrazilPontificia Univ Catolica Parana, Sch Med & Life Sci, Curitiba, PR, Brazil
Lopes, R. T.
Rached, R. N.
论文数: 0引用数: 0
h-index: 0
机构:
Pontificia Univ Catolica Parana, Sch Med & Life Sci, Curitiba, PR, BrazilPontificia Univ Catolica Parana, Sch Med & Life Sci, Curitiba, PR, Brazil
Rached, R. N.
Souza, E. M.
论文数: 0引用数: 0
h-index: 0
机构:
Pontificia Univ Catolica Parana, Sch Med & Life Sci, Curitiba, PR, Brazil
Imaculada Conceicao 1155, BR-80215901 Curitiba, PR, BrazilPontificia Univ Catolica Parana, Sch Med & Life Sci, Curitiba, PR, Brazil
机构:
Univ Med & Pharm, Dent Med Dept, 10-1st December Str, Oradea 410068, RomaniaUniv Med & Pharm, Dent Med Dept, 10-1st December Str, Oradea 410068, Romania
Ratiu, Cristian
Almasi, Adrian
论文数: 0引用数: 0
h-index: 0
机构:
Univ Med & Pharm, Dent Med Dept, 10-1st December Str, Oradea 410068, RomaniaUniv Med & Pharm, Dent Med Dept, 10-1st December Str, Oradea 410068, Romania
Almasi, Adrian
Porumb, Anca
论文数: 0引用数: 0
h-index: 0
机构:
Univ Med & Pharm, Dent Med Dept, 10-1st December Str, Oradea 410068, RomaniaUniv Med & Pharm, Dent Med Dept, 10-1st December Str, Oradea 410068, Romania
Porumb, Anca
Muntean, Alexandrina
论文数: 0引用数: 0
h-index: 0
机构:
Univ Med & Pharm, Fac Dent Med, 3 Iuliu Hatieganu,8 Babes Str, Cluj Napoca 400012, RomaniaUniv Med & Pharm, Dent Med Dept, 10-1st December Str, Oradea 410068, Romania
机构:
Department of Mechanical Design and Materials,High Institute of Energy,South Valley University,Aswan,EgyptDepartment of Mechanical Design and Materials,High Institute of Energy,South Valley University,Aswan,Egypt
Montasser M.Dewidar
Jae-Kyoo LIM
论文数: 0引用数: 0
h-index: 0
机构:
Automobile Hi-Technology Research Intitute,Faculty of Mechanical & Aerospace System Engineering,Chonbuk National University,Duckjin 1-664-14,Jeonju,JB 561-756,South KoreaDepartment of Mechanical Design and Materials,High Institute of Energy,South Valley University,Aswan,Egypt
Jae-Kyoo LIM
K.W.Dalgarno
论文数: 0引用数: 0
h-index: 0
机构:
School of Mechanical and Systems Engineering,Stephenson Building,Claremont Road,Newcastle University,Newcastle upon Tyne NE1 7RU,United KingdomDepartment of Mechanical Design and Materials,High Institute of Energy,South Valley University,Aswan,Egypt