A new method to reduce end effect of linear induction motor

被引:0
|
作者
Guo, Xiaozhou [1 ]
Zhou, Bin [2 ]
Lian, Jisan [1 ]
机构
[1] Southwest Jiaotong Univ, Sch Elect Engn, Minist Educ China, Key Lab Magnet Levitat Technol & Maglev Trains, Chengdu 610031, Sichuan, Peoples R China
[2] Southwest Jiaotong Univ, Sch Elect Engn, Chengdu 610031, Sichuan, Peoples R China
来源
JOURNAL OF MODERN TRANSPORTATION | 2012年 / 20卷 / 02期
关键词
linear induction motor; end effect compensation; thrust; pole pitch correction;
D O I
10.1007/BF03325783
中图分类号
U [交通运输];
学科分类号
08 ; 0823 ;
摘要
A new method to compensate the end effect of a linear induction motor (LIM) in low-speed maglev vehicles is proposed. With this method, the motors are close to each other so that the front motor's exit-end magnetic field extends into the next motor's entry zone. As a result, the motor's magnetic field traveling wave become continuous and the end effect of short primary LIMs is greatly weakened. In the analysis of the air-gap magnetic field distribution, the LIM is assumedly divided into two identical motors with the distances of 20, 40, 60, and 80 mm. The results show that the air-gap magnetic field is still continuous within these distances due to LIM's end effect. As the distance between two motors increases, the distortion of the air-gap magnetic field becomes more severe. Then, we investigate the relationship between the secondary speed and the thrust in three cases, i.e., a single LIM, two motors divided with 72 mm with pole pitch corrected, and two motors divided with 60 mm without the pole pitch being corrected. We find that the thrust has a small decrease when the speed increases, which means that the magnetic field is already continuous and its amplitude is approximately a constant. Furthermore, the thrust loss of case 3 is more than that of case 2, which indicates that the pole pitch correction is effective.
引用
收藏
页码:88 / 92
页数:5
相关论文
共 50 条
  • [1] A new method to reduce end effect of linear induction motor
    Xiaozhou Guo
    Bin Zhou
    Jisan Lian
    Journal of Modern Transportation, 2012, 20 (2): : 88 - 92
  • [2] A new method to reduce end effect of linear induction motor
    Xiaozhou GUO1*
    Journal of Modern Transportation, 2012, 20 (02) : 88 - 92
  • [3] A compensation method for the end effect of a linear induction motor
    Fujii, N
    Harada, T
    Sakamoto, Y
    Kayasuga, T
    ELECTRICAL ENGINEERING IN JAPAN, 2003, 143 (03) : 58 - 67
  • [4] Electromagnetic design method of linear induction motor considering lateral end effect
    Cai J.
    Wang S.
    Pang C.
    Xibei Gongye Daxue Xuebao/Journal of Northwestern Polytechnical University, 2021, 39 (05): : 1114 - 1121
  • [5] Simple end effect compensator for linear induction motor
    Fujii, N
    Kayasuga, T
    Hoshi, T
    IEEE TRANSACTIONS ON MAGNETICS, 2002, 38 (05) : 3270 - 3272
  • [6] An Approach for Reducing the End Effect of Linear Induction Motor
    Chen, Teng
    Xu, Tiejun
    Peng, Jiandong
    Jiang, Zhongyi
    Qian, Jiahao
    Lou, Jianyong
    2019 9TH IEEE ANNUAL INTERNATIONAL CONFERENCE ON CYBER TECHNOLOGY IN AUTOMATION, CONTROL, AND INTELLIGENT SYSTEMS (IEEE-CYBER 2019), 2019, : 536 - 541
  • [7] ANALYSIS OF END EFFECT IN LINEAR INDUCTION-MOTOR
    LOCCI, N
    SALIMBENI, D
    ELETTROTECNICA, 1978, 65 (01): : 93 - 98
  • [8] Structural Optimization of Linear Induction Motor for Reducing End Effect
    Jiang, Zhongyi
    Xu, Tiejun
    Qian, Jiahao
    Huang, Liqiu
    Xu, Hong
    Wang, Xuming
    Lou, Jianyong
    2020 IEEE 9TH INTERNATIONAL POWER ELECTRONICS AND MOTION CONTROL CONFERENCE (IPEMC2020-ECCE ASIA), 2020, : 1998 - 2001
  • [9] Influence of design parameters on linear induction motor end effect
    Creppe, Renato Crivellari
    Ulson, Jose Alfredo Covolan
    Rodrigues, Jose Francisco
    IEEE TRANSACTIONS ON ENERGY CONVERSION, 2008, 23 (02) : 358 - 362
  • [10] End-Effect Compensation in Linear Induction Motor Drives
    Satvati, Mohammad Reza
    Vaez-Zadeh, Sadegh
    JOURNAL OF POWER ELECTRONICS, 2011, 11 (05) : 697 - 703