Hot Corrosion Behavior of High-Chromium, High-Carbon Cast Irons in NaCl-KCl Molten Salts

被引:8
|
作者
Vuelvas-Rayo, S. [1 ]
Gonzalez-Rodriguez, J. G. [1 ]
Porcayo-Calderon, J. [2 ]
Salinas-Bravo, V. M. [2 ]
Maldonado-Ruiz, S. I. [3 ]
机构
[1] Univ Autonoma Estado Morelos, CIICAp, Ave Univ 1001,Col Chamilpa, Cuernavaca 62500, Morelos, Mexico
[2] IIE, Gerencia Mat & Proc Quimicos, Cuernavaca 62490, Morelos, Mexico
[3] Univ Autonoma Zacatecas, Fac Ingn, Zacatecas 98068, ZAC, Mexico
关键词
D O I
10.1155/2012/479761
中图分类号
O646 [电化学、电解、磁化学];
学科分类号
081704 ;
摘要
A study on the corrosion behavior of a series of experimental high-chromium (18.53-30.48 wt.%), high-carbon (3.82-5.17%) cast irons in NaCl-KCl (1 : 1M) at 670 degrees C has been evaluated by using weight loss technique and compared with a 304-type stainless steel. It was found that all castings had a higher corrosion rate than conventional 304SS and that the addition of Cr increased the degradation rate of the cast irons. Additionally, corrosion rate increased by increasing the C contents up to 4.29%, but it decreased with a further increase in its contents. Results are discussed in terms of consumption of the Cr2O3 layer by the melt.
引用
收藏
页数:9
相关论文
共 50 条
  • [1] High Temperature Corrosion of Inconel 600 in NaCl-KCl Molten Salts
    Salinas-Solano, G.
    Porcayo-Calderon, J.
    Gonzalez-Rodriguez, J. G.
    Salinas-Bravo, V. M.
    Ascencio-Gutierrez, J. A.
    Martinez-Gomez, L.
    ADVANCES IN MATERIALS SCIENCE AND ENGINEERING, 2014, 2014
  • [2] Characterization and corrosion behavior of high-chromium white cast irons
    Neville, A.
    Reza, F.
    Chiovelli, S.
    Revega, T.
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2006, 37A (08): : 2339 - 2347
  • [3] Characterization and corrosion behavior of high-chromium white cast irons
    A. Neville
    F. Reza
    S. Chiovelli
    T. Revega
    Metallurgical and Materials Transactions A, 2006, 37 : 2339 - 2347
  • [4] Study on microstructure and abrasion-corrosion resistant behavior of high-carbon high-chromium cast iron
    Qin, Zirui
    Sun, Lianchun
    Li, Longsheng
    Kang T'ieh/Iron and Steel (Peking), 1995, 30 (11): : 42 - 47
  • [5] Corrosion Behavior of High-Chromium Alloys in Molten LiCl-KCl Eutectic
    Ji, Mengmeng
    Li, Xin
    Liu, Zihe
    Yang, Xiaoguang
    Zhang, Xue
    Li, Ying
    ACTA METALLURGICA SINICA-ENGLISH LETTERS, 2024, 37 (10) : 1809 - 1818
  • [6] High-chromium and high-silicon cast irons
    Reynaud, A
    MATERIALS PERFORMANCE, 1996, 35 (02) : 93 - 95
  • [7] Electrochemical Behavior of Pb(II) in NaCl-KCl Molten Salts
    Hu, Jinming
    Cai, Yanqing
    Guo, Jing
    Xu, Ying
    RUSSIAN JOURNAL OF PHYSICAL CHEMISTRY A, 2024, 98 (06) : 1337 - 1345
  • [8] Thermal stability of the high-chromium cast irons
    Komarov, O.S.
    Sadovskij, V.M.
    Urbanovich, N.I.
    Livshits, G.F.
    Metallovedenie i Termicheskaya Obrabotka Metallov, 2002, (01): : 29 - 32
  • [9] Fracture Toughness of High-Chromium Cast Irons
    Hebbar, B. M.
    Seshan, S.
    Transactions of the American Foundrymen's Society, (102):
  • [10] Determining PREN for high-chromium cast irons
    Betts, BA
    Hebdon, SA
    MATERIALS PERFORMANCE, 2000, 39 (08) : 78 - 81