THE INFLUENCE OF CROSS-SECTION OF SPRUCE WOOD SPECIMENS ON SACCHARIDES CHANGES AT THERMAL LOADING

被引：0

作者：

Cabalova, Iveta ^{[1
]}

Kacik, Frantisek ^{[1
]}

Danica, Kacikova ^{[2
]}

Oravec, Matej ^{[1
]}

机构：

[1] Tech Univ Zvolene, Drevarska Fak, Katedra Chem & Chem Technol, TG Masaryka 24, Zvolen 96053, Slovakia

[2] Tech Univ Zvolene, Drevarska Fak, Katedra Protipoziarnej Ochrany, Zvolen 96053, Slovakia

来源：

ACTA FACULTATIS XYLOLOGIAE ZVOLEN | 2014年 / 56卷 / 02期

关键词：

saccharides; radiantheating; sprucewood; beams; cross-section;

D O I：

暂无

中图分类号：

TB3 [工程材料学]; TS [轻工业、手工业、生活服务业];

学科分类号：

0805 ; 080502 ; 0822 ;

摘要：

Spruce wood (Piceaabies L.) specimens with dimensions 60 x 60 x 800 mm (thickness x width x length) were thermally loaded by radiant heating. Tree different shapes of specimens were used; square, square with truncated edges and circular crosssections, respectively. The influence of cross-section on saccharides changes at thermal loading was investigated by high-performance liquid chromatography (HPLC). The results showed that hemicelluloses are less stable at thermal loading than cellulose. From non glucosidic units the content of mannose decrease in the maximum range, arabinose is the most stable saccharide. The smallest degradation of saccharides in square cross-section was observed; some minor amounts of hemicelluloses were found in charred layer. Larger changes were observed in square samples with truncated edges, followed by circular cross-sections samples. In charred layers of these samples the hemicelluloses were degraded completely.

引用

页码：81 / 86

页数：6

共 50 条

[1] Influence of cross-section and knot assessment on the strength of visually graded Norway spruce
Stapel, Peter
van de Kuilen, Jan-Willem G.
EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS, 2014, 72 (02) : 213 - 227
[2] FIRE DESIGN OF STEEL BEAMS WITH SLENDER CROSS-SECTION The influence of loading
Couto, Carlos
Real, Paulo Vila
Lopes, Nuno
Zhao, Bin
APPLICATIONS OF STRUCTURAL FIRE ENGINEERING, 2017,
[3] Influence of beam cross-section, loading arrangement and aggregate type on shear strength
Sagaseta, J.
Vollum, R. L.
MAGAZINE OF CONCRETE RESEARCH, 2011, 63 (02) : 139 - 155
[4] Cross-section reconstruction during uniaxial loading
Arthington, M. R.
Siviour, C. R.
Petrinic, N.
Elliott, B. C. F.
MEASUREMENT SCIENCE AND TECHNOLOGY, 2009, 20 (07)
[5] THE INFLUENCE OF THE CROSS-SECTION SHAPE OF SPECIMENS ON STRENGTH CHARACTERISTICS UNDER CONDITIONS OF INHOMOGENEOUS FLOW
FELLNER, M
PINK, E
SCRIPTA METALLURGICA ET MATERIALIA, 1992, 27 (03): : 259 - 264
[6] Changes in cross-section of wood fibres on drying determined by confocal laser scanning microscopy
Filonenko, Y
Parker, I
52ND APPITA ANNUAL GENERAL CONFERENCE, 1998 PROCEEDINGS, VOLS 1 AND 2, 1998, : 47 - 51
[7] THE INFLUENCE OF PRETREATMENTS WITH ENZYMES ON THE PENETRABILITY OF SMALL SPRUCE WOOD SPECIMENS
MILITZ, H
HOLZ ALS ROH-UND WERKSTOFF, 1993, 51 (02) : 135 - 142
[8] INFLUENCE OF FIRE ON SPRUCE WOOD LIGNIN CHANGES
Kacikova, Danica
Kacik, Frantisek
Bubenikova, Tatiana
Kosikova, Bozena
WOOD RESEARCH, 2008, 53 (04) : 95 - 103
[9] WELDING DOWELS IN THE TRANSVERSAL CROSS-SECTION OF SOLID WOOD
Zupcic, Ivica
Mihulja, Goran
Bogner, Andrija
Grdic, Dubravko
WOOD IS GOOD - PROPERTIES, TECHNOLOGY, VALORISATION, APPLICATION, 19TH INTERNATIONAL SCIENTIFIC CONFERENCE, 2008, 2008, : 105 - 112
[10] TRANSIENT THERMAL-STRESSES IN THERMAL-SHOCK SPECIMENS IN THE FORM OF A LONG CYLINDER WITH SQUARE CROSS-SECTION
SATYAMURTHY, K
HASSELMAN, DPH
SINGH, JP
KAMAT, MP
AMERICAN CERAMIC SOCIETY BULLETIN, 1980, 59 (03): : 354 - 354

← 1 2 3 4 5 →