HIGH-TEMPERATURE DRYING OF WOOD SEMIINDUSTRIAL KILN EXPERIMENTS

被引:9
|
作者
BASILICO, C
GENEVAUX, JM
MARTIN, M
机构
[1] Laboratoire d'Energétique et de Mécanique Théorlque et AppLiquée, Ecole des Mines - Parc de Saurupt
关键词
industrial feasibility; mechanical behaviour; new process; superheated steam; upgrading quality of softwood;
D O I
10.1080/07373939008959913
中图分类号
TQ [化学工业];
学科分类号
0817 ;
摘要
We briefly introduce the main results obtained in our laboratory about high temperature drying kinetic of softwood and hardwood. We point out during drying the acceleration effect of pressure gradient in vapour phase which develops in the wood. Then we give the main experimental results carried out on a small industrial kiln which can dry wood boards with moist air and superheated steam at high temperature till 180°C and velocity above to 6 m/s. The drying process is completely automated. Tested species are : beech, poplar, fir and maritime pine. We show that the drying kinetics are almost the same using the industrial kiln or the wind tunnel and we define for different board thicknesses, temperatures and velocities the optimal sequences of the process. The influence on the quality of the pretreatment, the various drying periods and the post-steaming is of importance. © 1990, Taylor & Francis Group, LLC. All rights reserved.
引用
收藏
页码:751 / 765
页数:15
相关论文
共 50 条
  • [1] Simulation of High-Temperature Drying of Wood
    Nabhani, M.
    Laghdir, A.
    Fortin, Y.
    DRYING TECHNOLOGY, 2010, 28 (10) : 1142 - 1147
  • [2] ROLE OF WOOD CHARACTERISTICS IN HIGH-TEMPERATURE DRYING
    HILLIS, WE
    JOURNAL OF THE INSTITUTE OF WOOD SCIENCE, 1975, 7 (38): : 60 - 67
  • [3] Prototype high temperature/high pressure kiln for the evaluation of wood drying schedules
    Perré, P
    Thiercelin, F
    Aguiar, O
    DRYING TECHNOLOGY, 2000, 18 (08) : 1849 - 1863
  • [4] High-temperature drying: A review of fundamental research and development in wood drying
    Hermawan, Andi
    Priadi, Trisna
    Murano, Tomoya
    Sakagami, Hiroki
    Fujimoto, Noboru
    DRYING TECHNOLOGY, 2024, 42 (16) : 2282 - 2298
  • [5] THE HIGH-TEMPERATURE DRYING OF SOFTWOOD BOARDS - A KILN-WIDE MODEL
    KEEY, RB
    PANG, S
    CHEMICAL ENGINEERING RESEARCH & DESIGN, 1994, 72 (A6): : 741 - 753
  • [6] High-temperature drying of softwood boards: a kiln-wide model
    Keey, R.B.
    Pang, S.
    Chemical Engineering Research and Design, 1994, 72 (A6) : 741 - 753
  • [7] Experimental study of the high-temperature thermomechanical drying of wood
    Gorbachev N.M.
    Kozhin V.P.
    Journal of Engineering Physics and Thermophysics, 2009, 82 (1) : 29 - 34
  • [8] EXPERIMENTAL STUDY OF THE HIGH-TEMPERATURE THERMOMECHANICAL DRYING OF WOOD
    Gorbachev, N. M.
    Kozhin, V. P.
    JOURNAL OF ENGINEERING PHYSICS AND THERMOPHYSICS, 2009, 82 (01) : 69 - 74
  • [9] Simulations and experiments on intelligent control of a wood-drying kiln
    Yan, GCK
    de Silva, CW
    Wang, GX
    ARTIFICIAL INTELLIGENCE IN REAL-TIME CONTROL 2000, 2001, : 71 - 75
  • [10] Changes of decay and termite durabilities of Japanese larch (Larix leptolepis) wood due to high-temperature kiln drying processes
    Shuichi Doi
    Masakazu Aoyama
    Shigeru Yamauchi
    Yasuji Kurimoto
    Journal of Wood Science, 2005, 51 : 526 - 530