THE INFLUENCE OF LUBRICANT CARRIER AND LUBRICATION CONDITIONS ON MECHANICAL-TECHNOLOGICAL PROPERTIES OF HIGH CARBON STEEL WIRES

被引：0
|
作者：
Suliga, M. [1 ]
Kruzel, R. [1 ]
机构：
[1] Univ Technol, Fac Prod Engn & Mat Technol Czestochowa, Krakow, Poland
来源：
METALURGIJA | 2016年 / 55卷 / 04期
关键词：
steel wire rod; lubricant carrier; drawing; mechanical properties;
D O I：
暂无
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
In this paper the effect of the type of soap powder and lubricant carriers on lubrication conditions in multipass drawing process of high carbon steel wires has been determined. The wire drawing process was conducted in industrial conditions by means of a modern multi-die Koch drawing machine. For wires drawn on borax and phosphate lubricant carriers the mechanical-technological properties have been carried out, in which yield stress, tensile strength, uniform elongation, number of twists and number of bends were assessed. It has been proved that the application of phosphate lubricant carrier and also the rotary die in the first draft in an essential way improve the lubrication condition in high speed multipass drawing process and makes it possible to refine the mechanical properties of wires.
引用
收藏
页码：651 / 654
页数：4
相关论文
共 50 条
  • [1] THE INFLUENCE OF THE HIGH DRAWING SPEED ON MECHANICAL-TECHNOLOGICAL PROPERTIES OF HIGH CARBON STEEL WIRES
    Suliga, M.
    ARCHIVES OF METALLURGY AND MATERIALS, 2011, 56 (03) : 823 - 828
  • [2] The Influence of the Value of Single Draft on Mechanical-technological Properties of High Carbon Steel Wires
    Suliga, Maciej
    MECHATRONIC SYSTEMS AND MATERIALS: MATERIALS PRODUCTION TECHNOLOGIES, 2010, 165 : 371 - 376
  • [3] THE INFLUENCE OF DIE APPROACH AND BEARING PART OF DIE ON MECHANICAL-TECHNOLOGICAL PROPERTIES OF HIGH CARBON STEEL WIRES
    Adamczyk, J.
    Suliga, M.
    Pilarczyk, J. W.
    Burdek, M.
    ARCHIVES OF METALLURGY AND MATERIALS, 2012, 57 (04) : 1105 - 1110
  • [4] THE IMPACT OF THE HEAT TREATMENT PARAMETERS ON PATENTING LINE ON MECHANICAL-TECHNOLOGICAL PROPERTIES OF STEEL CORD WIRES
    Kruzel, R.
    Suliga, M.
    METALURGIJA, 2016, 55 (04): : 647 - 650
  • [5] Influence of the Patenting Conditions on the Structure and Mechanical Properties of Thick High-carbon Steel Wires.
    Funke, Paul
    Krautmacher, Hans
    Kohlgrueber, Rolf
    Stahl und Eisen, 1982, 102 (02): : 79 - 87
  • [6] INFLUENCE OF PATENTING CONDITIONS ON THE STRUCTURE AND MECHANICAL-PROPERTIES OF THICK HIGH-CARBON STEEL WIRES
    FUNKE, P
    KRAUTMACHER, H
    KOHLGRUBER, R
    STAHL UND EISEN, 1982, 102 (02): : 53 - 61
  • [7] Mechanical-technological properties of beam welded high and ultra high strength steels
    Dilthey, U
    Ghandehari, A
    Bleck, W
    Budak, I
    ZEITSCHRIFT FUR METALLKUNDE, 2001, 92 (03): : 221 - 225
  • [8] Mechanical-technological properties of beam welded high and ultra high strength steels
    Dilthey, U.
    Ghandehari, A.
    Bleck, W.
    Budak, I.
    2001, Carl Hanser Verlag (92): : 221 - 225
  • [9] THE ANALYSIS OF THE HIGH SPEED WIRE DRAWING PROCESS OF HIGH CARBON STEEL WIRES UNDER HYDRODYNAMIC LUBRICATION CONDITIONS
    Suliga, M.
    ARCHIVES OF METALLURGY AND MATERIALS, 2015, 60 (01) : 403 - 408
  • [10] Characterization of mechanical-technological steel properties by non linear harmonics analysis within the production line
    Stegemann, D
    Reimche, W
    Heutling, B
    Krys, A
    Feiste, KL
    Kroos, J
    Stolzenberg, M
    Westkämper, G
    Angerer, R
    NONDESTRUCTIVE CHARACTERIZATION OF MATERIALS IX, 1999, 497 : 196 - 201
12345