Effect of nodule count and cooling rate on As-Cast matrix of a Cu-Mo spheroidal graphite

The transformation of austenite to ferrite and graphite or to pearlite in spheroidal graphite cast iron depends on a number of factors, among which are the nodule count and the cooling rate. In this study, the pearlite fraction decreased as the nodule count increased for a given cooling rate. Furthermore, as the cooling rate increased, the fraction of pearlite increased. Both effects were more sensitive at low nodule count. The effects of altering these parameters on the relative amount of pearlite and ferrite in the matrix of a copper-molybdenum (Cu-Mo) spheroidal graphite cast iron were addressed using heats carried out in an induction furnace, and the melts were treated with magnesium ferrosilicon in a ladle. To vary the nodule count, the melts were inoculated with two different amounts of ferrosilicon. Pouring was performed into sand molds of cylindrical cavities with different section size in order to achieve various cooling rates. Both the nodule count and the cooling rate affected the relative amount of ferrite and pearlite in the matrix.