Effect of hydrocarbon production on reflection amplitude properties of reservoirs—a case study of Kov Field, Niger Delta, Nigeria

A better understanding of how hydrocarbons and other fluids such as brine move in the reservoirs within the Kov Field will enable the improved application of secondary recovery methods such as water and gas injections and also highlight areas within the field that have remaining hydrocarbons. This work focuses on the two major sandstone reservoir intervals, the AG-I and the AG-II all within the Agbada Formation, since they showed prominent amplitude changes. In the AG-I Formation, the results obtained from the production data and rock physics modeling show an increase in the amplitude impedance (AI) contrast around injection wells and a decrease in AI contrast around production wells due to fluid replacement, and it also deals with the pressure changes in correlation to the water injection performed to maintain the reservoir pressure, while in the AG-II Formation, the effect of hydrocarbon production serves to visualize and map the oil-water contact (OWC) as it evolves with the production time; the OWC is not observable on later seismic vintages because the reservoir drops below the OWC. Conclusively, the effect of hydrocarbon production throughout the reservoir and across the entire Field would be beneficial in mapping fluid changes in the Kov Field, which can be utilized for enhanced oil recovery and improved reservoir management.