A Correlation Between Failure Angle and Constituent for Al-AlN Composites Under Uniaxial Tensile Conditions

被引：0

作者：

Peng Yu

G. B. Schaffer

Ma Qian

机构：

[1] The University of Queensland,

[2] School of Mechanical and Mining Engineering,undefined

[3] ARC Centre of Excellence for Design in Light Metals,undefined

[4] The University of Queensland,undefined

[5] Faculty of Engineering,undefined

[6] Architecture and Information Technology,undefined

[7] ARC Centre of Excellence for Design in Light Metals,undefined

来源：

Metallurgical and Materials Transactions A | 2012年 / 43卷

关键词：

Normal Stress; Selective Laser Sinter; Failure Plane; Nitridation Time; Failure Angle;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

Al-AlN composites with different AlN reinforcement fractions and porosity were fabricated through nitridation of laser-sintered AA 6061 powder followed by infiltration with AA 6061. Their failure behaviors were investigated under uniaxial tensile loading conditions. Tensile testing and fractography indicate that the fracture mode changes gradually from ductile to brittle fracture with increasing AlN reinforcement or porosity. An analysis of the fractured Al-AlN tensile samples reveals that the failure surface angle, θ, is dictated by the volume fraction of the matrix, fm, in a form of tan θ = fm5.5.

引用

页码：3293 / 3299

页数：6

共 24 条

[1] A Correlation Between Failure Angle and Constituent for Al-AlN Composites Under Uniaxial Tensile Conditions
Yu, Peng
Schaffer, G. B.
Qian, Ma
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2012, 43A (09): : 3293 - 3299
[2] Nanoindentation, Compressive and Tensile Deformation Study of In-Situ Al-AlN Metal Matrix Composites
Fale, Sandeep
Likhite, Ajay
Bhatt, Jatin
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2015, 68 (02) : 291 - 297
[3] Interfacial reactions between aluminum nitride reinforcement particles and aluminum alloys in Al-AlN metal matrix composites
Chédru, M
Chermant, JL
Vicens, J
JOURNAL OF MATERIALS SCIENCE LETTERS, 2001, 20 (17) : 1577 - 1583
[4] Automatic Detection and Characterization of Cracked Constituent Particles/Inclusions in Al-Alloys under Uniaxial Tensile Loading
Lee, Soon Gi
Jang, Sung Ho
Kimz, Yong Chan
JOURNAL OF THE KOREAN INSTITUTE OF METALS AND MATERIALS, 2009, 47 (01): : 7 - 12
[5] Tensile properties and failure mechanism of three-dimensional angle interlocking woven layup composites under tensile loading
Zhu C.
Wu N.
Zhang Y.
Jiao Y.
Chen L.
Liu G.
Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica, 2022, 39 (07): : 3173 - 3183
[6] Failure mechanisms of fusion-bonded reinforcement joints in reinforced thermoplastic pipes under uniaxial tensile conditions
Ren, Jingwen
Wang, Hanxiang
Liu, Yanxin
Che, Jiaqi
Zhang, Yanwen
INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, 2024, 212
[7] A correlation between texture evolution and dislocation density in Al-Mg alloys during uniaxial tensile deformation
Thirathipviwat, Pramote
Nozawa, Sega
Furusawa, Moe
Onuki, Yusuke
Hasegawa, Makoto
Matsumoto, Katsushi
Sato, Shigeo
MATERIALS LETTERS, 2023, 349
[8] CREEP OF POROUS COMPACTS UNDER THE EFFECT OF UNIAXIAL TENSILE STRESSES DURING HEATING .2. CORRELATION BETWEEN SHRINKAGE AND UNIAXIAL CREEP
GEGUZIN, YE
MATSOKIN, VP
PLUZHNIKOVA, DV
KHUSSEIN, F
SOVIET POWDER METALLURGY AND METAL CERAMICS, 1987, 26 (02): : 130 - 133
[9] Fatigue failure characterization of multi-axial warp-knitted composites under cyclic uniaxial tensile loading
Jing Lingxiao
Deng Penghu
Wang Yi
Li Dan
Zhang Zaixing
JOURNAL OF THE TEXTILE INSTITUTE, 2019, 110 (05) : 700 - 706
[10] CORRELATION BETWEEN ATTENUATION AND STRAIN IN CROSS-PLIED GRP COMPOSITES UNDER TENSILE LOADING
SRIVASTAVA, VK
DASTALUKDER, NK
COMPOSITES, 1991, 22 (04): : 295 - 297

← 1 2 3 →