Microstructure and mechanical properties of chromium oxide coatings

被引：0
|
作者：
Xiaolu Pang
Kewei Gao
Alex A. Volinsky
机构：
[1] University of Science and Technology Beijing,Department of Materials Physics and Chemistry
[2] University of South Florida,Department of Mechanical Engineering
来源：
Journal of Materials Research | 2007年 / 22卷
关键词：
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Chromium oxide coatings were deposited on low-carbon steel by radiofrequency reactive magnetron sputtering at different oxygen flux values. X-ray diffraction, x-ray photoelectron spectroscopy, and high-resolution transmission electron microscopy were used to investigate the microstructure of chromium oxide coatings. Varying oxygen flux changed the coating microstructure; as with increasing oxygen flux the chromium oxide coating undergoes amorphous-to-crystalline transformation. The coating developed strong (300) texture at higher oxygen flux. Hardness, elastic modulus, wear resistance, and adhesion were investigated by nanoindentation and pin-on-disk tests. With changes in the coating microstructure as a function of increased oxygen flux, hardness, elastic modulus, and wear resistance were improved, but its adhesion was weakened.
引用
收藏
页码：3531 / 3537
页数：6
相关论文
共 50 条
  • [1] Microstructure and mechanical properties of chromium oxide coatings
    Department of Materials Physics and Chemistry, University of Science and Technology Beijing, Beijing 100083, China
    不详
    J Mater Res, 2007, 12 (3531-3537):
  • [2] Microstructure and mechanical properties of chromium oxide coatings
    Pang, Xiaolu
    Gao, Kewei
    Volinsky, Alex A.
    JOURNAL OF MATERIALS RESEARCH, 2007, 22 (12) : 3531 - 3537
  • [3] Annealing effects on microstructure and mechanical properties of chromium oxide coatings
    Pang, Xiaolu
    Gao, Kewei
    Luo, Fei
    Yang, Huisheng
    Qiao, Lijie
    Wang, Yanbin
    Volinsky, Alex A.
    THIN SOLID FILMS, 2008, 516 (15) : 4685 - 4689
  • [4] Role of deposition parameters on microstructure and mechanical properties of chromium oxide coatings
    Luo, Fei
    Pang, Xiaolu
    Gao, Kewei
    Yang, Huisheng
    Wang, Yanbin
    SURFACE & COATINGS TECHNOLOGY, 2007, 202 (01): : 58 - 62
  • [5] Interfacial microstructure of chromium oxide coatings
    Pang, Xiaolu
    Gao, Kewei
    Yang, Huisheng
    Qiao, Lijie
    Wang, Yanbin
    Volinsky, A. A.
    ADVANCED ENGINEERING MATERIALS, 2007, 9 (07) : 594 - 599
  • [6] Effect of annealing treatment on the microstructure, mechanical and tribological properties of chromium carbonitride coatings
    Aissani, Linda
    Fellah, Mamoun
    Radjehi, Lamia
    Nouveau, Corinne
    Montagne, Alex
    Alhussein, Akram
    SURFACE & COATINGS TECHNOLOGY, 2019, 359 : 403 - 413
  • [7] Effect of Silicon Addition on Microstructure and Mechanical Properties of Chromium and Titanium Based Coatings
    Carlos Ardila-Tellez, Luis
    Manuel Sanchez-Moreno, Jose
    Mauricio Moreno-Tellez, Carlos
    REVISTA FACULTAD DE INGENIERIA, UNIVERSIDAD PEDAGOGICA Y TECNOLOGICA DE COLOMBIA, 2014, 23 (37): : 9 - 21
  • [8] Microstructure and mechanical properties of chromium carbide coatings deposited by magnetron sputtering technique
    Aissani L.
    Rahmouni K.
    Guelani L.
    Zaabat M.
    Alhussein A.
    Defect and Diffusion Forum, 2019, 397 : 118 - 124
  • [9] Influence of nitrogen and niobium incorporation in bcc-chromium coatings on microstructure and mechanical properties
    Jathar, Sagar
    Honnali, Sanath Kumar
    Farhadizadeh, Alireza
    le Febvrier, Arnaud
    Oden, Magnus
    Eklund, Per
    SURFACE & COATINGS TECHNOLOGY, 2024, 494
  • [10] Microstructure and tribological properties of plasma-sprayed chromium oxide-molybdenum oxide composite coatings
    Lyo, IW
    Ahn, HS
    Lim, DS
    SURFACE & COATINGS TECHNOLOGY, 2003, 163 : 413 - 421
12345