The effects of plasma nitriding process parameters on the wear characteristics of AISI M2 tool steel

被引：1
|
作者：
M.A. Pessin
M.D. Tier
T.R. Strohaecker
A. Bloyce
Y. Sun
T. Bell
机构：
[1] Federal University of Rio Grande do Sul – UFRGS,Universidade Regional Integrada – URI
[2] Osvaldo Aranha,undefined
[3] 99/610,undefined
[4] Universidade das Missões,undefined
[5] 505/210,undefined
[6] The University of Birmingham,undefined
来源：
Tribology Letters | 2000年 / 8卷
关键词：
plasma nitriding; wear; tool steel;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The main aim of this work is to evaluate the effects of the plasma nitriding process on AISI M2 tool steel. In previous work, treatment time and temperature were varied to identify the treatment conditions for good wear behaviour. In the present work, the treatment time was fixed while temperature and gas pressure were varied. Samples were characterised by glow discharge optical spectroscopy, scanning electron microscopy, X‐ray diffraction, surface microhardness and wear test. The specimens nitrided at 400 and 900 Pa showed the best wear performance, which is possibly due to reduction of the friction coefficient and the low adhesive wear observed. Samples processed at 200 Pa showed spalling during the wear test, indicating a brittle surface.
引用
收藏
页码：223 / 228
页数：5
相关论文
共 50 条
  • [1] The effects of plasma nitriding process parameters on the wear characteristics of AISI M2 tool steel
    Pessin, MA
    Tier, MD
    Strohaecker, TR
    Bloyce, A
    Sun, Y
    Bell, T
    TRIBOLOGY LETTERS, 2000, 8 (04) : 223 - 228
  • [2] NITRIDING OF AISI M2 TOOL STEEL IN AN INDUCTIVE RF PLASMA
    GRILL, A
    ITZHAK, D
    THIN SOLID FILMS, 1983, 101 (03) : 219 - 222
  • [3] Effect of Plasma Nitriding Parameters on the Wear Behaviour of AISI D6 Tool Steel
    Korkmaz, Ersin Eser
    Bayram, Ali
    Ertan, Rukiye
    Yavuz, Nurettin
    MATERIALS TESTING, 2013, 55 (06) : 455 - 461
  • [4] Plasma nitriding of AISI M2 steel: performance evaluation in forming tools
    Abreu, L. H. P.
    Pimentel, M. C. L.
    Borges, W. F. A.
    Costa, T. H. C.
    Naeem, M.
    Iqbal, J.
    Sousa, R. R. M.
    SURFACE ENGINEERING, 2020, 36 (05) : 508 - 515
  • [5] Microstructure and wear properties of AISI M2 tool steel on RF plasma nitriding at different N2-H2 gas compositions
    Mohammadzadeh, R.
    Akbari, A.
    Drouet, M.
    SURFACE & COATINGS TECHNOLOGY, 2014, 258 : 566 - 573
  • [6] Effect of the initial microstructure on the plasma nitriding behavior of AISI M2 high speed steel
    Akbari, A.
    Mohammadzadeh, R.
    Templier, C.
    Riviere, J. P.
    SURFACE & COATINGS TECHNOLOGY, 2010, 204 (24): : 4114 - 4120
  • [7] Deep Cryogenic Treatment of AISI M2 Tool Steel and Optimisation of Its Wear Characteristics Using Taguchi‘s Approach
    Satish Kumar
    Mohan Nagraj
    Arunkumar Bongale
    Nitin Khedkar
    Arabian Journal for Science and Engineering, 2018, 43 : 4917 - 4929
  • [8] Optimization of Cutting Parameters for Cubic Boron Nitride Tool Wear in Hard Turning AISI M2
    Zhou, Tianwen
    Shi, Guangfeng
    Wu, Qingtang
    Wang, Zezhen
    Che, Jianwei
    Wu, Huan
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2024, 33 (20) : 11298 - 11308
  • [9] Wear performance of different nitride-based coatings on plasma nitrided AISI M2 tool steel in dry and lubricated conditions
    Hacisalihoglu, Ilyas
    Yildiz, Fatih
    Alsaran, Akgun
    WEAR, 2017, 384 : 159 - 168
  • [10] Wear on tool steel AISI M2, D6 and 52100 coated with Al2O3 by the MOCVD process
    Bressan, Jose Divo
    Battiston, Giovanni A.
    Gerbasi, Rosalba
    Daros, Deivid Paganini
    Gilapa, Leonidas Mamani
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2006, 179 (1-3) : 81 - 86
12345