Short-duration gas nitriding of parts made of high-strength cast iron in the gaz joint-stock company

被引：0

作者：

V. N. Starostin

E. I. Pytyaeva

V. V. Pershina

机构：

[1] GAZ Joint-Stock Company,

来源：

Metal Science and Heat Treatment | 1998年 / 40卷

关键词：

Cast Iron; Diffusion Layer; Nitriding Process; Automobile Part; Globular Graphite;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

Castings of high-strength iron are use very widely. The range of automobile parts cast from iron with globular graphite is widening. It includes crankshafts and camshafts, flywheels, crankcases, various engine parts, etc. In order to increase hardness of the surface layer, the wear resistance, and the service life of parts made of high-strength cast iron, they are often subjected to nitriding. The present work is aimed at studying the nitriding process for parts made of VCh70 and VCh85 high-strength cast iron.

引用

页码：421 / 422

页数：1

共 21 条

[1] Short-duration gas nitriding of parts made of high-strength cast iron in the GAZ Joint-Stock Company
Starostin, VN
Pytyaeva, EI
Pershina, VV
METAL SCIENCE AND HEAT TREATMENT, 1998, 40 (9-10) : 421 - 422
[2] SHORT-DURATION GAS NITRIDING OF CAST-IRON CYLINDER BLOCK LINERS
GORYUSHIN, VV
GLUSHCHENKO, VN
DUKA, NE
KONDRASHOVA, GA
METAL SCIENCE AND HEAT TREATMENT, 1984, 26 (7-8) : 524 - 528
[3] SHORT-DURATION GAS NITRIDING OF CAST-IRON CYLINDER BLOCK LINERS.
Goryushin, V.V.
Glushchenko, V.N.
Duka, N.E.
Kondrashova, G.A.
Metal Science and Heat Treatment (English Translation of Metallovedenie i Termicheskaya Obrabotka, 1984, 26 (7-8): : 524 - 528
[4] Short-duration gas nitriding of parts of VAZ passenger cars
Tikhonov, AK
Bogdanova, NV
METAL SCIENCE AND HEAT TREATMENT, 1996, 38 (9-10) : 424 - 427
[5] NITRIDING OF HIGH-STRENGTH CAST-IRON
LAKHTIN, YM
SEMENOV, RA
METAL SCIENCE AND HEAT TREATMENT, 1975, 17 (7-8) : 641 - 644
[6] High-strength iron castings production. Experience of the Kama foundry open joint stock company
Sivko, V.I.
Vaziev, I.K.
Tuliao gongye, 1998, 28 (12): : 6 - 8
[7] EFFECT OF SURFACE PLASTIC-DEFORMATION ON ENDURANCE OF PARTS MADE OF HIGH-STRENGTH CAST-IRON WITH STRESS RAISERS
DEKHTYAR, LI
RUSSIAN ENGINEERING JOURNAL, 1977, 57 (04): : 50 - 52
[8] High-Strength Cast Iron for Joint Hinge Pairs in Multibucket Excavators.
Demidovich, N.S.
Vanzha, G.K.
Zadorozhnyi, V.V.
Mayurnikov, A.V.
1600,
[9] PRODUCING HIGH-STRENGTH CAST-IRON BY MELTING METAL IN A GAS CUPOLA
MARIENBA.LM
SOSNOVSK.ED
PATALAKH.IV
PAVLENKO, NS
CHERNYI, AA
KASIMKHO.S
GRACHEV, VA
STEEL IN THE USSR, 1971, 1 (09): : 750 - &
[10] STRENGTHENING ISOTHERMALLY HARDENED HIGH-STRENGTH CAST-IRON PARTS BY SURFACE INDUCTION HARDENING
MAYURNIKOV, AV
OLEINICHENKO, VG
METAL SCIENCE AND HEAT TREATMENT, 1981, 23 (1-2) : 74 - 80

← 1 2 3 →