Thrust Slip Bearings in a Turbulent Friction Mode with the Rheological Properties of a Viscoelastic Lubricant

被引：0

作者：

I. V. Kolesnikov

E. S. Novikov

机构：

[1] Rostov State University of Transport Communications,

来源：

Journal of Machinery Manufacture and Reliability | 2019年 / 48卷

关键词：

D O I：

暂无

中图分类号：

学科分类号：

摘要：

Based on the concept of the turbulent flow of a viscoelastic lubricant, a two-component lubrication system consisting of mineral oil and a viscoelastic lubricant that represents a melt of fusible metals is considered. The results of studies on the tribological characteristics such as friction forces and the bearing capacity of friction assemblies are presented taking into account the viscosity and shear modulus of the molten layer depending on the temperature. Ways to improve the properties of lubricants through the introduction of additives and fillers therein are considered.

引用

页码：61 / 72

页数：11

共 13 条

[1] Thrust Slip Bearings in a Turbulent Friction Mode with the Rheological Properties of a Viscoelastic Lubricant
Kolesnikov, I. V.
Novikov, E. S.
JOURNAL OF MACHINERY MANUFACTURE AND RELIABILITY, 2019, 48 (01) : 61 - 72
[2] Hydrodynamic calculation of a thrust plain bearing that operates with viscoelastic lubricant under turbulent friction conditions
Akhverdiev K.S.
Mukutadze M.A.
Semenko I.S.
Journal of Machinery Manufacture and Reliability, 2011, 40 (4) : 359 - 365
[3] Properties of Lubricant Additives in Slip with Boundary Friction
Kokhanovsky V.A.
Maiba I.A.
Glazunov D.V.
Russian Engineering Research, 2023, 43 (02) : 135 - 137
[4] RHEOLOGICAL PROPERTIES OF OILS FOR FLUID-FRICTION BEARINGS IN ROLLING-MILLS
BADYSHTOVA, KM
GRIGOREVA, NI
DYACHENKO, BP
CHEMISTRY AND TECHNOLOGY OF FUELS AND OILS, 1978, 14 (11-1) : 885 - 888
[5] RHEOLOGICAL PROPERTIES OF OILS FOR FLUID-FRICTION BEARINGS IN ROLLING MILLS.
Badyshtova, K.M.
Grigor'eva, N.I.
D''yachenko, B.P.
1600, (14): : 11 - 12
[6] Effects of rheological properties on drag reduction in turbulent boundary layer of viscoelastic fluids
Graduate School of Engineering, Nagoya Institute of Technology, Gokiso-cho, Showa-ku, Nagoya-shi, Aichi, 466-8555, Japan
Nihon Kikai Gakkai Ronbunshu, B, 2009, 750 (227-234):
[7] Rheological properties of new oils applied for fluid-friction bearings in rolling mills
Grigor'eva, N.I.
Gerber, S.B.
Shabalova, R.L.
Khimiya i Tekhnologiya Topliv i Masel, 1993, (07): : 30 - 31
[8] RHEOLOGICAL PROPERTIES OF PLASTIC LUBRICANTS AND ROTATIONAL RESISTANCE OF ROLLING-FRICTION BEARINGS AT LOW SPEEDS
DEINEGA, YF
VERBITSK.YA
DOKLADY AKADEMII NAUK SSSR, 1967, 172 (03): : 572 - &
[9] Two phosphonium cation-based ionic liquids used as lubricant additive. Part II: Tribofilm analysis and friction torque loss in cylindrical roller thrust bearings at constant temperature
Hernandez Battez, A.
Fernandes, Carlos M. C. G.
Martins, Ramiro C.
Graca, Beatriz M.
Anand, M.
Blanco, D.
Seabra, Jorge H. O.
TRIBOLOGY INTERNATIONAL, 2017, 109 : 496 - 504
[10] Effects of friction properties and rheological structures on the deformation patterns and evolution of fold-and-thrust belts-New insights from analogue modelling
He, Wengang
Yu, Yixin
Luo, You
Li, Shenghong
JOURNAL OF STRUCTURAL GEOLOGY, 2023, 173

← 1 2 →