NiAl-based electrodes by combined use of centrifugal SHS and induction remelting

被引：14

作者：

Pogozhev Y.S. ^{[1
]}

Sanin V.N. ^{[2
]}

Ikornikov D.M. ^{[2
]}

Andreev D.E. ^{[2
]}

Yukhvid V.I. ^{[2
]}

Levashov E.A. ^{[1
]}

Sentyurina Z.A. ^{[1
]}

Logacheva A.I. ^{[3
]}

Timofeev A.N. ^{[3
]}

机构：

[1] National University of Science and Technology MISiS, Moscow

[2] Institute of Structural Macrokinetics and Materials Science, Russian Academy of Sciences, Chernogolovka, Moscow

[3] Research and Production Corporation KOMPOZIT, Korolev, Moscow

来源：

Pogozhev, Yu. S. (pogozhev@rambler.ru) | 1600年 / Allerton Press Incorporation卷 / 25期

关键词：

centrifugal SHS casting; electrodes for plasma rotating electrode process (PREP); induction remelting; nickel aluminide;

D O I：

10.3103/S1061386216030092

中图分类号：

学科分类号：

摘要：

NiAl-based electrodes of a required size were fabricated by combined use of centrifugal SHS casting and induction remelting in an inert atmosphere and characterized by modern analytical methods. Thus produced electrode materials exhibiting high chemical purity and low content of impurity gases (0.005 wt % O, 0.0001 wt % N) can be recommended for use in centrifugal plasma sputtering of micro granules via the plasma rotating electrode process (PREP). © 2016, Allerton Press, Inc.

引用

页码：186 / 199

页数：13

共 10 条

[1] Manufacture of NiAl-based rods for plasma centrifugal spraying using mechanochemical synthesis
Logacheva A.I.
Gusakov M.S.
Sentyurina Z.A.
Logachev I.A.
Kandyba A.A.
Russian Metallurgy (Metally), 2017, 2017 (05) : 432 - 440
[2] Fabrication of submicron powders and nanostructured NiAl-based granules by the SHS method from a mechanically activated mixture
V. V. Kurbatkina
E. I. Patsera
A. Rakhimova
A. I. Logacheva
E. A. Levashov
Russian Journal of Non-Ferrous Metals, 2015, 56 : 561 - 566
[3] Fabrication of submicron powders and nanostructured NiAl-based granules by the SHS method from a mechanically activated mixture
Kurbatkina, V. V.
Patsera, E. I.
Rakhimova, A.
Logacheva, A. I.
Levashov, E. A.
RUSSIAN JOURNAL OF NON-FERROUS METALS, 2015, 56 (05) : 561 - 566
[4] Structure and properties of NiAl-Cr(Co,Hf) alloys prepared by centrifugal SHS casting followed by vacuum induction remelting. Part 2 Evolution of the structure and mechanical behavior at high temperature
Zaitsev, A. A.
Sentyurina, Zh. A.
Levashov, E. A.
Pogozhev, Yu. S.
Sanin, V. N.
Sidorenko, D. A.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2017, 690 : 473 - 481
[5] Preparation of the close cross-section component of NiAl-based alloy by a novel combined sintering method
Ning, Hanwei
Wang, Dongjun
Qin, Shaohua
Zhao, Jie
Wei, Wenqing
Liu, Gang
Journal of Materials Processing Technology, 2024, 327
[6] Preparation of the close cross-section component of NiAl-based alloy by a novel combined sintering method
Ning, Hanwei
Wang, Dongjun
Qin, Shaohua
Zhao, Jie
Wei, Wenqing
Liu, Gang
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2024, 327
[7] Structural investigation of 70Cu/30Fe based cast alloy obtained by combined use of centrifugal casting-SHS process and forging
Sanin, Vitalii V.
Filonov, Michael R.
Yukhvid, Vladimir I.
Nikin, Yurii A.
INTERNATIONAL CONFERENCE ON MODERN TRENDS IN MANUFACTURING TECHNOLOGIES AND EQUIPMENT (ICMTMTE 2017), 2017, 129
[8] Induction Motors Dynamic Eccentricity Fault Diagnosis Based on the Combined Use of WPD and EMD-Simulation Study
Tian, Kun
Zhang, Tao
Ai, Yibo
Zhang, Weidong
APPLIED SCIENCES-BASEL, 2018, 8 (10):
[9] Preparation of Ti3AlC2-Al Cermets by Combined Use of SHS of Ti3AlC2 Porous Skeleton and Spontaneous Infiltration with Al and Al-Based Melts
Latukhin, E. I.
Umerov, E. R.
Amosov, A. P.
INTERNATIONAL JOURNAL OF SELF-PROPAGATING HIGH-TEMPERATURE SYNTHESIS, 2023, 32 (01) : 23 - 29
[10] Preparation of Ti3AlC2–Al Cermets by Combined Use of SHS of Ti3AlC2 Porous Skeleton and Spontaneous Infiltration with Al and Al-Based Melts
E. I. Latukhin
E. R. Umerov
A. P. Amosov
International Journal of Self-Propagating High-Temperature Synthesis, 2023, 32 : 23 - 29

← 1 →