Effect of two-step cooling process on mechanical properties of TRIP steel with high performance

被引：0
|
作者：
M.L. Li
H. Jiang
Y.L. He
L.B. Chen
G.T. Zhang
H. Wang
X.G. Lu
L. Li
机构：
[1] Shanghai University,School of Materials Science and Engineering
[2] Shanghai University,State Key Laboratory of Advanced Special Steel
[3] Pangang Group Research Institute,undefined
来源：
Journal of Iron and Steel Research International | 2018年 / 25卷
关键词：
Transformation-induced plasticity steel; Two-step cooling; Microstructure; Mechanical property;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
A novel two-step cooling experiment was established to simulate the slow cooling process of continuous annealing production line for transformation-induced plasticity (TRIP) steel. The microstructures and mechanical properties of TRIP steel soaked at 700 °C for different time were investigated by tensile test, scanning electron microscopy, X-ray diffraction, and thermodynamic and kinetic calculation. It is shown that the steel soaked for 15 s exhibits the optimal product of strength and elongation (PSE > 30,000 MPa%) due to the transformation of austenite to proeutectoid ferrite, which delays the bainite transformation and improves the stability of retained austenite. In addition, the mechanical properties of TRIP steel soaked over 30 s are much lower, resulting from the precipitation of cementite, which decreases the stability of retained austenite and weakens the TRIP effect.
引用
收藏
页码：426 / 432
页数：6
相关论文
共 50 条
  • [1] Effect of two-step cooling process on mechanical properties of TRIP steel with high performance
    Li, M. L.
    Jiang, H.
    He, Y. L.
    Chen, L. B.
    Zhang, G. T.
    Wang, H.
    Lu, X. G.
    Li, L.
    JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL, 2018, 25 (04) : 426 - 432
  • [2] Room temperature mechanical properties and microstructure of a low alloyed TRIP-assisted steel subjected to one-step and two-step quenching and partitioning process
    Zinsaz-Borujerdi, A.
    Zarei-Hanzaki, A.
    Abedi, H. R.
    Karam-Abian, M.
    Ding, H.
    Han, D.
    Kheradmand, N.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2018, 725 : 341 - 349
  • [3] Effect of two-step intercritical annealing on microstructure and mechanical properties of hot-rolled medium manganese TRIP steel containing δ-ferrite
    Xu, Yun-bo
    Hu, Zhi-ping
    Zou, Ying
    Tan, Xiao-dong
    Han, Ding-ting
    Chen, Shu-qing
    Ma, De-gang
    Misra, R. D. K.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2017, 688 : 40 - 55
  • [4] A novel two-step intercritical annealing process to improve mechanical properties of medium Mn steel
    Hu, Bin
    Luo, Haiwen
    ACTA MATERIALIA, 2019, 176 : 250 - 263
  • [5] Two-step austempering of high performance steel with nanoscale microstructure
    Avishan, Behzad
    Tavakolian, Majid
    Yazdani, Sasan
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2017, 693 : 178 - 185
  • [6] MECHANICAL PROPERTIES OF A HIGH Si AND Mn STEEL HEAT TREATED BY TWO-STEP QUENCHING AND PARTITIONING
    Ghazvinloo, H. R.
    Honarbakhsh-Raouf, A.
    Kiani-Rashid, A. R.
    MATERIALS SCIENCE, 2018, 53 (04) : 481 - 487
  • [7] Mechanical Properties of a High Si and Mn Steel Heat Treated by Two-Step Quenching and Partitioning
    H. R. Ghazvinloo
    A. Honarbakhsh-Raouf
    A. R. Kiani-Rashid
    Materials Science, 2018, 53 : 481 - 487
  • [8] Effect of step cooling process on microstructures and mechanical properties in thermal simulated CGHAZ of an ultra-high strength steel
    Guo, Xuanming
    Liu, Shichang
    Xu, Jijin
    Wang, Shuai
    Fu, Liming
    Chai, Ze
    Lu, Hao
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2021, 824
  • [9] The Effect of the Two-Step Sintering Process on Consolidation of Fluoridated Hydroxyapatite and its Mechanical Properties and Bioactivity
    Esnaashary, Mohammadhossein
    Fathi, Mohammadhossein
    Ahmadian, Mahdi
    INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY, 2014, 11 (01) : 47 - 56
  • [10] Effect of Cation Doping on Mechanical Properties of Yttria Prepared by an Optimized Two-Step Sintering Process
    Khosroshahi, Hadi Razavi
    Ikeda, Hiroyuki
    Yamada, Kazuhiro
    Saito, Noritaka
    Kaneko, Kenji
    Hayashi, Koichi
    Nakashima, Kunihiko
    JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2012, 95 (10) : 3263 - 3269
12345