The Effect of Iron Content on the Iron-Containing Intermetallic Phases in a Cast 6060 Aluminum Alloy

被引：0
|
作者：
L. Sweet
S. M. Zhu
S. X. Gao
J. A. Taylor
M. A. Easton
机构：
[1] Monash University,CAST Co
[2] The University of Queensland,operative Research Centre (CAST CRC), Department of Materials Engineering
来源：
Metallurgical and Materials Transactions A | 2011年 / 42卷
关键词：
Al3Fe; Intermetallic Particle; EBSD Pattern; Monoclinic Crystal Structure; 6xxx Series Alloy;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The effect of iron content, ranging from 0.1 to 0.5 wt pct, on the formation of Fe-containing intermetallic phases in a cast 6060 aluminum alloy was investigated. Various characterization techniques, including optical microscopy, scanning electron microscopy (SEM), electron backscatter diffraction (EBSD), and transmission electron microscopy (TEM) were used to examine the identity, morphology, and prevalence of the Fe-Al and Fe-Al-Si intermetallic phases. The predominant phase is found to be β-Al5FeSi at lower Fe levels, but this is replaced by α-AlFeSi (bcc structure) with increasing Fe content. The Fe containing intermetallic phases observed are compared to those predicted using the Scheil module of THERMO-CALC software, and the similarities and discrepancies are discussed.
引用
收藏
页码：1737 / 1749
页数：12
相关论文
共 50 条
  • [1] The Effect of Iron Content on the Iron-Containing Intermetallic Phases in a Cast 6060 Aluminum Alloy
    Sweet, L.
    Zhu, S. M.
    Gao, S. X.
    Taylor, J. A.
    Easton, M. A.
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2011, 42A (07): : 1737 - 1749
  • [2] A Formation Map of Iron-Containing Intermetallic Phases in Recycled Cast Aluminum Alloys
    E. Cinkilic
    C. D. Ridgeway
    X. Yan
    A. A. Luo
    Metallurgical and Materials Transactions A, 2019, 50 : 5945 - 5956
  • [3] A Formation Map of Iron-Containing Intermetallic Phases in Recycled Cast Aluminum Alloys
    Cinkilic, E.
    Ridgeway, C. D.
    Yan, X.
    Luo, A. A.
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2019, 50 (12): : 5945 - 5956
  • [4] The characterisation of iron-containing intermetallic phases within industrially cast aluminium
    Forder, SD
    Reeder, A
    Brooks, JS
    Rignall, M
    Evans, PV
    HYPERFINE INTERACTIONS, 2000, 126 (1-4): : 193 - 197
  • [5] The characterisation of iron-containing intermetallic phases within industrially cast aluminium
    S.D. Forder
    A. Reeder
    J.S. Brooks
    M. Rignall
    P.V. Evans
    Hyperfine Interactions, 2000, 126 : 193 - 197
  • [6] CRYSTALLIZATION BEHAVIOR OF IRON-CONTAINING INTERMETALLIC COMPOUNDS IN 319 ALUMINUM-ALLOY
    NARAYANAN, LA
    SAMUEL, FH
    GRUZLESKI, JE
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1994, 25 (08): : 1761 - 1773
  • [7] The Formation of Iron-Containing Intermetallic Phases in Al–12%Si Alloy by Using Tungsten Addition
    A. P. Zykova
    A. V. Chumaevskiy
    Metallography, Microstructure, and Analysis, 2020, 9 : 360 - 368
  • [8] Changing the solidification sequence and the morphology of iron-containing intermetallic phases in AA6061 aluminum alloy processed by spray forming
    Pereira, L. H.
    Asato, G. H.
    Otani, L. B.
    Jorge, A. M., Jr.
    Kiminami, C. S.
    Bolfarini, C.
    Botta, W. J.
    MATERIALS CHARACTERIZATION, 2018, 145 : 507 - 515
  • [9] The Formation of Iron-Containing Intermetallic Phases in Al-12%Si Alloy by Using Tungsten Addition
    Zykova, A. P.
    Chumaevskiy, A., V
    METALLOGRAPHY MICROSTRUCTURE AND ANALYSIS, 2020, 9 (03) : 360 - 368
  • [10] QUATERNARY IRON-CONTAINING PHASES IN AL-SI CAST ALLOYS
    YANEVA, S
    STOICHEV, N
    KAMENOVA, Z
    BUDUROV, S
    ZEITSCHRIFT FUR METALLKUNDE, 1984, 75 (05): : 395 - 398
12345