The Relationship between the Microstructure and Abrasive Resistance of a Hardfacing Alloy in the Fe-Cr-C-Nb-V System

被引：0
|
作者：
E.O. Correa
N.G. Alcântara
D.G. Tecco
R.V. Kumar
机构：
[1] University of Cambridge,Department of Materials Science and Metallurgy
[2] Universidade Federal de Itajubá,undefined
[3] Universidade Federal de São Carlos,undefined
[4] Welding Alloys Ltd.,undefined
来源：
Metallurgical and Materials Transactions A | 2007年 / 38卷
关键词：
Carbide; Austenite; Wear Resistance; Wear Surface; Abrasive Wear;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The relationship between abrasive wear resistance and microstructure of a hardfacing alloy based on the Fe-Cr-C-Nb-V system was investigated. This material was developed for cladding, by an open arc welding technique, of components subjected to severe abrasive wear. The work undertaken included the solidification study, microstructural characterization, and abrasion testing. Microstructural examinations of hardfaced layer showed that the microstructure of the alloy consisted of a large volume fraction of primary niobium carbides randomly dispersed in a metastable austenitic matrix containing fine M3C carbides and “islands” of eutectic mixture of γ/M7C3. Energy dispersive X-ray analysis results showed that V preferentially partitioned into the NbC and M3C phases. In comparison with the conventional high carbon/high chromium hardfacing alloy with higher hardness, a Fe-Cr-C-Nb-V hardfacing alloy exhibited improved abrasive wear resistance and a microstructure with higher toughness.
引用
收藏
页码：1671 / 1680
页数：9
相关论文
共 50 条
  • [1] The relationship between the microstructure and abrasive resistance of a hardfacing alloy in the Fe-Cr-C-Nb-V system
    Correa, E. O.
    Alcantara, N. G.
    Tecco, D. G.
    Kumar, R. V.
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2007, 38A (08): : 1671 - 1680
  • [2] Effect of nitrogen alloying on the microstructure and abrasive impact wear resistance of Fe-Cr-C-Ti-Nb hardfacing alloy
    Wang, Jibo
    Liu, Tiantian
    Zhou, Yefei
    Xing, Xiaolei
    Liu, Sha
    Yang, Yulin
    Yang, Qingxiang
    SURFACE & COATINGS TECHNOLOGY, 2017, 309 : 1072 - 1080
  • [3] The effect of Ta substitution for Nb on the microstructure and wear resistance of an Fe-Cr-C hardfacing alloy
    Sadeghi, Farzad
    Najafi, Hamidreza
    Abbasi, Alireza
    SURFACE & COATINGS TECHNOLOGY, 2017, 324 : 85 - 91
  • [4] Effects of Nb, V, and W on Microstructure and Abrasion Resistance of Fe-Cr-C Hardfacing Alloys
    Wang, Qingbao
    Li, Xiaoyan
    WELDING JOURNAL, 2010, 89 (07) : 133S - 139S
  • [5] Microstructure and wear resistance of Fe-Cr13-C-Nb hardfacing alloy with Ti addition
    Yang, Ke
    Gao, Yuan
    Yang, Ke
    Bao, Yefeng
    Jiang, Yongfeng
    WEAR, 2017, 376 : 1091 - 1096
  • [6] Effects of Nb, V, and W on microstructure and abrasion resistance of Fe-Cr-C hardfacing alloys
    Wang, Qingbao
    Li, Xiaoyan
    Welding Journal (Miami, Fla), 2010, 89 (07):
  • [7] The effect of microstructure on abrasive wear of a Fe-Cr-C-Nb hardfacing alloy deposited by the open arc welding process
    Correa, E. O.
    Alcantara, N. G.
    Valeriano, L. C.
    Barbedo, N. D.
    Chaves, R. R.
    SURFACE & COATINGS TECHNOLOGY, 2015, 276 : 479 - 484
  • [8] The Effect of Microstructure on Properties of Fe-Cr-C-Nb/Ti Hardfacing Alloy
    Tang, Wenbo
    Guo, Yungang
    Wang, Hongrui
    MECHANICS, SOLID STATE AND ENGINEERING MATERIALS, 2011, 279 : 126 - 131
  • [9] Abrasive wear behavior of Fe-Cr-C hardfacing alloy
    Wang, Zhihui
    He, Dingyong
    Jiang, Jianmin
    Cui, Li
    Hanjie Xuebao/Transactions of the China Welding Institution, 2010, 31 (11): : 73 - 76
  • [10] The effect of Cr on the microstructure and wear resistance of Fe-Cr-V-C hardfacing alloys
    Zong, Lin
    Liu, Zhengjun
    ADVANCED MATERIALS, PTS 1-4, 2011, 239-242 : 1203 - +
12345