Effect of the substrate temperature and deposition rate on the initial growth of thin lithium niobate-tantalate films deposited from a thermal plasma

Thin lithium niobate-tantalate (LiNb0.5Ta0.5O3) films are studied at the initial stage of deposition from a thermal plasma. The effect of two deposition parameters (the substrate temperature and the deposition rate) on the film morphology, the film crystallinity, and the density of nuclei growing on a (0001) sapphire substrate are investigated. It is shown that the crystalline structure and roughness of a film are determined, for the most part, in the initial growth stage and therefore depend directly on both parameters. At the optimum temperatures and growth rates for obtaining good characteristics of (0006) texture, crystallinity, and surface roughness of the films, the film nuclei on the substrate have a high density and good epitaxial orientation to it. If the growth conditions are not optimum, the islands are either amorphous or have a low density on the substrate surface. The nucleation activation energy is observed to decrease as the deposition rate increases, which supports the assumption that the species that are active in film deposition are “hot” clusters forming in an oxygen-argon plasma in the immediate vicinity of the substrate.