Effect of compositions on the microstructure and properties of plasma clad NiAl coating

被引：0
|
作者：
Pengcheng Xia
Guanpeng Han
Kun Xie
机构：
[1] Shandong University of Science and Technology,School of Materials Science and Engineering
来源：
Metals and Materials International | 2016年 / 22卷
关键词：
intermetallics; coating; surface modification; wear; hardness test;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
NiAl intermetallic coating was in-situ synthesized by the plasma cladding process. The effect of atomic ratio of Ni to Al atoms 1 (coating 1), 2 (coating 2) and 3 (coating 3) on the microstructure and mechanical properties of plasma clad was studied by combining microstructural analysis and wear-resistant test. The obtained results indicated that the microstructure of the synthesized NiAl coating was compact and uniform in addition to few porosities and the NiAl coating well metallurgically bonded with the substrate. Coating 1 is mainly composed of NiAl and the solid solution γ-(Fe,Ni) phases. Coating 2 contains of NiAl, Ni3Al and γ-(Fe,Ni). Coating 3 is mainly composed of Ni3Al, γ-(Fe,Ni) and NiAl. Coating 3 has excellent wear-resistance property owing to high hardness and low friction coefficient. Ni3Al phase has great influence on wear-resistance property of coating 3. The main wear mechanism of coating 1 is multi-plastic deformation wear and adhesion wear. Grain abrasion is the main wear mechanism of coating 3. The main wear mechanism of coating 2 is grain abrasion and partly adhesive wear.
引用
收藏
页码：424 / 429
页数：5
相关论文
共 50 条
  • [1] Effect of Compositions on the Microstructure and Properties of Plasma Clad NiAl Coating
    Xia, Pengcheng
    Han, Guanpeng
    Xie, Kun
    METALS AND MATERIALS INTERNATIONAL, 2016, 22 (03) : 424 - 429
  • [2] Microstructure and properties of plasma clad Ni composite coating
    Liu Shenglin
    Sun Dongbai
    Fan Zishuan
    Yu Hongying
    Wang Xudong
    Meng Huimin
    Li Huiqin
    RARE METAL MATERIALS AND ENGINEERING, 2006, 35 : 232 - 235
  • [3] Effect of Plasma Cladding Speed on the Microstructure and Properties of ZrC-ZrB2/NiAl Coating
    Xia, Pengcheng
    Li, Ye
    Xie, Kun
    Cao, Meiqing
    Tan, Yunliang
    MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS, 2021, 24 (04):
  • [4] Microstructure of air plasma-sprayed NiAl coating
    Izdinsky, K
    Dufek, J
    Ivan, J
    Zemankova, M
    Minár, P
    Izdinska, Z
    KOVOVE MATERIALY-METALLIC MATERIALS, 2003, 41 (06): : 365 - 376
  • [5] Phase compositions and microstructure of plasma sprayed wollastonite coating
    Liu, XY
    Ding, CX
    SURFACE & COATINGS TECHNOLOGY, 2001, 141 (2-3): : 269 - 274
  • [6] Effect of Powder Pre-oxidation on Microstructure and Properties of NiAl Laser Cladding Coating
    Li Y.
    Tan N.
    Liu J.
    Hu Z.-Y.
    Zhang G.-L.
    Yong Q.-S.
    Surface Technology, 2023, 52 (07): : 358 - 368
  • [7] Microstructure and Wear Properties of Laser-Clad NiCrBSi Coating
    Guo, Yongqiang
    Zhao, Hongwei
    Sun, Ronglu
    MATERIALS PROCESSING TECHNOLOGY, PTS 1-4, 2011, 291-294 : 105 - +
  • [8] Effect of Molybdenum on the Microstructure and High-Temperature Tribological Properties of Laser Clad CoCrW Coating
    Wenpeng Han
    Gongjun Cui
    Haotian Cui
    Ziming Kou
    Yanping Liu
    Transactions of the Indian Institute of Metals, 2022, 75 : 3193 - 3202
  • [9] Effect of Molybdenum on the Microstructure and High-Temperature Tribological Properties of Laser Clad CoCrW Coating
    Han, Wenpeng
    Cui, Gongjun
    Cui, Haotian
    Kou, Ziming
    Liu, Yanping
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2022, 75 (12) : 3193 - 3202
  • [10] Microstructure and wear resistance of plasma clad TiC/γ-(Fe, Ni) composite coating
    Liu, Yuan-Fu
    Liu, Xiu-Bo
    Zhang, Wei
    Yang, Si-Ze
    Cailiao Rechuli Xuebao/Transactions of Materials and Heat Treatment, 2012, 33 (03): : 119 - 123
12345