Nanofluid turbulent forced convection through a solar flat plate collector with Al2O3 nanoparticles

被引：0

作者：

Seyyed Ali Farshad

M. Sheikholeslami

Seyed Hossein Hosseini

Ahmad Shafee

Zhixiong Li

机构：

[1] Babol Noshirvani University of Technology,Department of Mechanical Engineering

[2] Babol Noshirvani University of Technology,Renewable Energy Systems and Nanofluid Applications in Heat Transfer Laboratory

[3] Public Authority of Applied Education and Training,Applied Science Department, College of Technological Studies

[4] Ocean University of China,School of Engineering

[5] University of Wollongong,School of Mechanical, Materials, Mechatronic and Biomedical Engineering

来源：

Microsystem Technologies | 2019年 / 25卷

关键词：

D O I：

暂无

中图分类号：

学科分类号：

摘要：

A numerical approach has been offered in this investigation regarding the turbulent three-dimensional flow due to utilizing twisted tape insets. Solar heat flux was employed to augment the temperature of nanomaterial. Streamline and velocity as well as turbulent intensity are shown in contours. In addition, the simulations with FVM accomplish to capture the behavior of thermal performance with variation of Reynolds number, diameter ratio and number of revolution. Selecting lower diameter ratio results in the thicker thermal boundary layer. Thermal performance is directly proportional to both geometric variables.

引用

页码：4237 / 4247

页数：10

共 50 条

[1] Nanofluid turbulent forced convection through a solar flat plate collector with Al2O3 nanoparticles
Farshad, Seyyed Ali
Sheikholeslami, M.
Hosseini, Seyed Hossein
Shafee, Ahmad
Li, Zhixiong
MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS, 2019, 25 (11): : 4237 - 4247
[2] Assessment of Al2O3 nanoparticles for the optimal operation of the flat plate solar collector
Mirzaei, Mohsen
Hosseini, Seyed Mohammad Sadegh
Kashkooli, Amir Mansour Moradi
APPLIED THERMAL ENGINEERING, 2018, 134 : 68 - 77
[3] Finite Element Simulation of Forced Convection in a Flat Plate Solar Collector: Influence of Nanofluid with Double Nanoparticles
Nasrin, R.
Alim, M. A.
JOURNAL OF APPLIED FLUID MECHANICS, 2014, 7 (03) : 543 - 556
[4] Experimental investigations on direct absorption solar flat plate collector using Al2O3 nanofluid
Khatri, Rahul
Jangid, Rajesh
Tomar, Pranay Singh
Sharma, Shyam Sunder
INTERNATIONAL JOURNAL OF NANOTECHNOLOGY, 2021, 18 (11-12) : 968 - 979
[5] Energy and exergy comparison of a flat-plate solar collector using water, Al2O3 nanofluid, and CuO nanofluid
Tong, Yijie
Lee, Hoseong
Kan, Woobin
Cho, Honghyun
APPLIED THERMAL ENGINEERING, 2019, 159
[6] Energy and exergy efficiency of a flat plate solar collector using pH treated Al2O3 nanofluid
Said, Z.
Saidur, R.
Sabiha, M. A.
Hepbasli, A.
Rahim, N. A.
JOURNAL OF CLEANER PRODUCTION, 2016, 112 : 3915 - 3926
[7] INVESTIGATING THE EFFECT OF Al2O3/Water NANOFLUID ON THE EFFICIENCY OF A THERMOSYPHON FLAT-PLATE SOLAR COLLECTOR
Negm, Mohamed Nabeel A.
Abdel-Rehim, Ahmed A.
Attia, Ahmed A. A.
PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2016, VOL. 8, 2017,
[8] Comparison of the effects of Al2O3 and CuO nanoparticles on the performance of a solar flat-plate collector
Munuswamy, Dinesh Babu
Madhavan, Venkata Ramanan
Mohan, Mukunthan
JOURNAL OF NON-EQUILIBRIUM THERMODYNAMICS, 2015, 40 (04) : 265 - 273
[9] Performance Analysis of Flat Plate Solar Collector using Al2O3/Distilled Water Nanofluid: An Experimental Investigation
Rajput, Nitesh Singh
Shukla, Dipesh Dilipbhai
Rajput, Deep
Sharm, Shiv Kumar
MATERIALS TODAY-PROCEEDINGS, 2019, 10 : 52 - 59
[10] Turbulent forced convection and entropy production of a nanofluid in a solar collector considering various shapes for nanoparticles
Alsarraf, Jalal
Shahsavar, Amin
Mahani, Roohollah Babaei
Talebizadehsardari, Pouyan
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 2020, 117

← 1 2 3 4 5 →