Uniaxial Ratcheting Behavior of a Weather-Resistant Rail Steel: Effect of Mean Stress and Stress Amplitude

被引:0
|
作者
P. P. Sarkar
P. C. Chakraborti
机构
[1] R & D Centre for Iron and Steel,Metallurgical and Material Engineering Department
[2] Steel Authority of India Limited,undefined
[3] Jadavpur University,undefined
关键词
hysteresis loop; mean stress; plastic strain energy; rail steel; ratcheting; stress amplitude;
D O I
暂无
中图分类号
学科分类号
摘要
Uniaxial ratcheting behavior of a weather-resistant rail steel belonging to 60 kg/m 90-UTS variety was studied in true stress control mode with varying mean stress (σm) and stress amplitude (σa) at constant σa and σm, respectively. In all the loading conditions, the ratcheting strain (εr) increased almost monotonically and accumulation of ratcheting strain was found to increase at higher magnitude of σm or σa, perhaps due to the increase in remnant dislocation density in the substructure of the investigated steel. After the initial sharp fall in ratcheting strain rate with elapsed cycles in all the cases, a constant ratcheting rate was attained very soon; thereafter, the ratcheting strain kept on accumulating in the specimen at this constant rate till the failure of the specimen occurred. It was quite interesting to see that on increasing the mean stress level at a fixed stress amplitude, after the initial decrease, fatigue life of the steel improved marginally owing to the effect of mean stress-induced hardening. In absolute contrast, under the influence of stress amplitude at a fixed mean stress, fatigue life of the rail steel deteriorated gradually but to a significant extent. Finally, stress amplitude was found to have more severe effect than that offered by the mean stress in terms of` ratcheting strain accumulation and fatigue life of the investigated rail steel.
引用
收藏
页码:2936 / 2946
页数:10
相关论文
共 50 条
  • [1] Uniaxial Ratcheting Behavior of a Weather-Resistant Rail Steel: Effect of Mean Stress and Stress Amplitude
    Sarkar, P. P.
    Chakraborti, P. C.
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2020, 29 (05) : 2936 - 2946
  • [2] Analysis of uniaxial ratcheting behavior and cyclic mean stress relaxation of a duplex stainless steel
    Lee, Chin-Hyung
    Vuong Nguyen Van Do
    Chang, Kyong-Ho
    INTERNATIONAL JOURNAL OF PLASTICITY, 2014, 62 : 17 - 33
  • [3] Influence of mean stress and stress amplitude on uniaxial and biaxial ratcheting of ST52 steel and its prediction by the AbdelKarim-Ohno model
    Halama, Radim
    Fusek, Martin
    Poruba, Zdenek
    INTERNATIONAL JOURNAL OF FATIGUE, 2016, 91 : 313 - 321
  • [4] Mean stress and ratcheting considerations in uniaxial fatigue under stress control
    Kim, K. S.
    Kim, H. S.
    Lim, C. B.
    STRUCTURAL INTEGRITY AND FAILURE, 2008, 41-42 : 147 - 155
  • [5] Effect of mean stress and ratcheting strain on fatigue life of steel
    Univ of Alberta, Edmonton, Canada
    Int J Fatigue, 5 (335-341):
  • [6] Effect of mean stress and ratcheting strain on fatigue life of steel
    Xia, Z
    Kujawski, D
    Ellyin, F
    INTERNATIONAL JOURNAL OF FATIGUE, 1996, 18 (05) : 335 - 341
  • [7] Behavior of 304L stainless steel under uniaxial loading and effect of the mean stress on the ratcheting by simulation using chaboche model
    Boussalih, Fatiha
    Meziani, Salim
    Fouathia, Atman
    Fedaoui, Kamel
    UPB Scientific Bulletin, Series D: Mechanical Engineering, 2019, 81 (02): : 179 - 190
  • [8] Ratcheting and fatigue behavior of a copper alloy under uniaxial cyclic loading with mean stress
    Lim, C. -B.
    Kim, K. S.
    Seong, J. B.
    INTERNATIONAL JOURNAL OF FATIGUE, 2009, 31 (03) : 501 - 507
  • [9] Effect of stress amplitude on uniaxial ratcheting of aluminum alloy 2124-T851
    Halama, R.
    Markopoulos, A.
    Fojtik, F.
    Fusek, M.
    Poruba, Z.
    Famfulik, J.
    MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK, 2017, 48 (08) : 814 - 819
  • [10] Effect of mean stress and stress amplitude on the ratcheting behaviour of 316LN stainless steel under dynamic strain aging regime
    Sarkar, Aritra
    Nagesha, A.
    Sandhya, R.
    Mathew, M. D.
    MATERIALS AT HIGH TEMPERATURES, 2012, 29 (04) : 351 - 358