Microstructure, Hardness, and Residual Stress Distributions in T-Joint Weld of HSLA S500MC Steel

被引：0

作者：

Intissar Frih

Guillaume Montay

Pierre-Antoine Adragna

机构：

[1] LASMIS,

[2] UMR ICD 6281,undefined

[3] University of Technology of Troyes,undefined

来源：

Metallurgical and Materials Transactions A | 2017年 / 48卷

关键词：

Welding; Ferrite; Residual Stress; Base Metal; Bainite;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

This paper investigates the characterization of the microstructure, hardness, and residual stress distributions of MIG-welded high-strength low-alloy S500MC steel. The T-joint weld for 10-mm-thick plates was joined using a two passes MIG welding technology. The contour method was performed to measure longitudinal welding residual stress. The obtained results highlighted a good correlation between the metallurgical phase constituents and hardness distribution within the weld zones. In fact, the presence of bainite and smaller ferrite grain size in the weld-fusion zone might be the reason for the highest hardness measured in this region. A similar trend of the residual stress and hardness distributions was also obtained.

引用

页码：1103 / 1110

页数：7

共 30 条

[1] Microstructure, Hardness, and Residual Stress Distributions in T-Joint Weld of HSLA S500MC Steel
Frih, Intissar
Montay, Guillaume
Adragna, Pierre-Antoine
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2017, 48A (03): : 1103 - 1110
[2] INFLUENCE OF A WELDING DEFECT ON A HSLA S500MC STEEL PLATE: MICROSTRUCTURE AND RESIDUAL STRESS EVALUATION
Frih, Intissar
Adragna, Pierre-Antoine
Montay, Guillaume
M2D2015: PROCEEDINGS OF THE 6TH INTERNATIONAL CONFERENCE ON MECHANICS AND MATERIALS IN DESIGN, 2015, : 169 - 180
[3] Induction-assisted laser beam welding of a thermomechanically rolled HSLA S500MC steel: A microstructure and residual stress assessment
Coelho, R. S.
Corpas, M.
Moreto, J. A.
Jahn, A.
Standfuss, J.
Kaysser-Pyzalla, A.
Pinto, H.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2013, 578 : 125 - 133
[4] Analysis of residual stress and hardness of T-joint on China low activation martensitic steel laser weld
Lei, Y. (yclei@ujs.edu.cn), 2012, Harbin Research Institute of Welding (33):
[5] Influence of Heat Input on Microstructure and Mechanical Properties of Gas Tungsten Arc Welded HSLA S500MC Steel Joints
Kornokar, Kianoosh
Nematzadeh, Fardin
Mostaan, Hossein
Sadeghian, Amirhossein
Moradi, Mahmoud
Waugh, David G.
Bodaghi, Mahdi
METALS, 2022, 12 (04)
[6] Microstructure and Stress Distribution Analysis of T-Joint of Clam Steel
Qiang Zhu
Yucheng Lei
Yunlong Wang
Shenyong Liang
Yimin Ye
Changsheng Li
Journal of Fusion Energy, 2015, 34 : 540 - 544
[7] Microstructure and Stress Distribution Analysis of T-Joint of Clam Steel
Zhu, Qiang
Lei, Yucheng
Wang, Yunlong
Liang, Shenyong
Ye, Yimin
Li, Changsheng
JOURNAL OF FUSION ENERGY, 2015, 34 (03) : 540 - 544
[8] EFFECTS OF PREHEAT AND INTERPASS TEMPERATURE ON THE RESIDUAL STRESS AND DISTORTION ON THE T-JOINT WELD
Fu, Guangming
Lourengo, Marcelo Igor
Duan, Menglan
Estefen, Segen F.
33RD INTERNATIONAL CONFERENCE ON OCEAN, OFFSHORE AND ARCTIC ENGINEERING, 2014, VOL 8A: OCEAN ENGINEERING, 2014,
[9] Microstructure, Hardness and Residual Stress Distributions in Butt-Welded Joint
Frih, Intissar
ADVANCES IN ACOUSTICS AND VIBRATION II (ICAV2018), 2019, 13 : 310 - 319
[10] Effect of residual stress and weld metal on hysteretic behavior of a welded tubular t-joint
Jang, Gab-Chul
Chang, Kyong-Ho
Lee, Chin-Hyung
PROGRESSES IN FRACTURE AND STRENGTH OF MATERIALS AND STRUCTURES, 1-4, 2007, 353-358 : 2077 - +

← 1 2 3 →