Effect of the surface texturing treatment with Nd:YAG laser on the wear resistance of CoCr alloy

The present work aims to explore the tribological behavior of the laser texturing process with different patterns on a Co based alloy using a pulsed Nd: YAG laser. Different parameters such as peak power, speed and spot diameter of the laser were explored for the experimental setting. The microstructural analysis was performed using scanning electron microscopy (SEM) with energy dispersive spectroscopy (EDS), X-ray diffraction (XRD), and nanoindentation tests. The influence of the different textured patterns of the tribological performance tested with a pin-on-disc tribometer under lubricated sliding condition was evaluated. The results showed that typical interdendritic structures in the as-cast CoCr alloy condition were refined due to the heat input and fast cooling rate during the laser treatment. The refined microstructure showed less volumetric loss resulting in a increment of wear resistance and a better tribological performance than as-cast alloy. The correlation among laser parameters, microstructural effect and their influence in wear resistance is discussed.