Fabrication and mechanical properties of WC particulate reinforced Cu47Ti33Zr11Ni6Sn2Si1 bulk metallic glass matrix composites

被引：0
|
作者：
H. K. Lim
E. S. Park
J. S. Park
W. T. Kim
D. H. Kim
机构：
[1] Yonsei University,Center for Non
[2] Chongju University,Crystalline Materials, Department of Metallurgical Engineering
来源：
Journal of Materials Science | 2005年 / 40卷
关键词：
Plastic Strain; Shear Band; Matrix Composite; Compression Strength; Glass Matrix;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The mechanical behavior of the WC particulate (WCp) reinforced Cu47Ti33Zr11Ni6Sn2Si1 bulk metallic glass (BMG) matrix composites has been examined. The mechanical properties are improved with increasing WCp content up to 20 wt%. The ultimate compression strength and plastic strain of the composite containing 20 wt% WCp are 2.4 GPa and 2.4%, while those of the monolithic BMG are 1.6 GPa and ∼0%, respectively. The multiple shear band formation and crack deflections through WC particles have been identified as the main mechanism for the improved toughness.
引用
收藏
页码：6127 / 6130
页数：3
相关论文
共 50 条
  • [1] Fabrication and mechanical properties of WC particulate reinforced Cu47Ti33Zr11Ni6Sn2Si1 bulk metallic glass matrix composites
    Lim, HK
    Park, ES
    Park, JS
    Kim, WT
    Kim, DH
    JOURNAL OF MATERIALS SCIENCE, 2005, 40 (23) : 6127 - 6130
  • [2] Effects of infiltration parameters on mechanical and microstructural properties of tungsten wire reinforced Cu47Ti33Zr11Ni6Sn2Si1 metallic glass matrix composites
    Khademian, N.
    Gholamipour, R.
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2013, 23 (05) : 1314 - 1321
  • [3] Influence of Processing Route on the Surface Reactivity of Cu47Ti33Zr11Ni6Sn2Si1 Metallic Glass
    Barreto, Erika Soares
    Uhlenwinkel, Volker
    Frey, Maximilian
    Gallino, Isabella
    Busch, Ralf
    Luettge, Andreas
    METALS, 2021, 11 (08)
  • [4] Microstructural characterization of the emulsified Cu47Ti33Zr11Ni6Sn2Si1 alloy powder
    Kang, Ho-suk
    Kang, Hee-sam
    Yoon, Woo-young
    HEAT TREATMENT OF MATERIALS, 2006, 118 : 623 - +
  • [5] On the fragility of Cu47Ti33Zr11Ni8Si1 metallic glass
    Venkataraman, S.
    Biswas, K.
    Wei, B. C.
    Sordelet, D. J.
    Eckert, J.
    JOURNAL OF PHYSICS D-APPLIED PHYSICS, 2006, 39 (12) : 2600 - 2608
  • [6] Metallic glass formation in the Cu47Ti33Zr11Ni8Si1 alloy
    Venkataraman, S.
    Bartusch, B.
    Mickel, C.
    Kim, K. B.
    Das, J.
    Scudino, S.
    Stoica, M.
    Sordelet, D. J.
    Eckert, J.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2007, 444 (1-2): : 257 - 264
  • [7] In situ synthesis of TiC reinforced Cu47Ti34Zr11Ni8 bulk metallic glass composites
    SUN Yufeng1
    2. Beijng Institute of Pharmaceutical Chemistry
    Chinese Science Bulletin, 2004, (06) : 542 - 546
  • [8] Nanocrystallization of gas atomized Cu47Ti33Zr11Ni8Si1 metallic glass
    Venkataraman, S
    Scudino, S
    Eckert, J
    Gemming, T
    Mickel, C
    Schultz, L
    Sordelet, DJ
    JOURNAL OF MATERIALS RESEARCH, 2006, 21 (03) : 597 - 607
  • [9] Nanocrystal development in Cu47Ti33Zr11Ni8Si1 metallic glass powders
    Venkataraman, S.
    Loeser, W.
    Eckert, J.
    Gemming, T.
    Mickel, C.
    Schubert-Bischoff, P.
    Wanderka, N.
    Schultz, L.
    Sordelet, D. J.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2006, 415 (1-2) : 162 - 169
  • [10] Mechanical and corrosion properties of Ti-Ni-Cu-Zr metallic glass matrix composites
    Li, Q.
    Liu, S. S.
    Wang, X. H.
    Yang, T.
    Dong, C.
    Hu, J. T.
    Jiang, Y. Q.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2017, 727 : 1344 - 1350
12345