Studies on the properties of high-velocity oxy-fuel thermal spray coatings for higher temperature applications

被引：0
|
作者：
T. S. Sidhu
S. Prakash
R. D. Agrawal
机构：
[1] Indian Institute of Technology Roorkee,Metallurgical and Materials Engineering Department
来源：
Materials Science | 2005年 / 41卷
关键词：
Oxidation; Porosity; Structural Material; Wear Resistance; Thermal Spray;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Materials operating at high temperatures in corrosive media suffer erosion-corrosion wear, oxidation, and hot corrosion. Among various methods used for the protection of the surfaces against degradation, we can especially mention the technology of application of coatings by high-velocity oxy-fuel spraying, which gives coatings which high strength and hardness, low (less than 1%) porosity, and high erosion-corrosion and wear resistances. The characteristics of the coatings and their protective properties are presented. The role of some high-velocity oxy-fuel coatings in the protection of metals and alloys against degradation at high temperatures in various media is demonstrated.
引用
收藏
页码：805 / 823
页数：18
相关论文
共 50 条
  • [1] Studies on the properties of high-velocity oxy-fuel thermal spray coatings for higher temperature applications
    Sidhu, T. S.
    Prakash, S.
    Agrawal, R. D.
    MATERIALS SCIENCE, 2005, 41 (06) : 805 - 823
  • [2] Characterization of Copper Coatings Deposited by High-Velocity Oxy-Fuel Spray for Thermal and Electrical Conductivity Applications
    H. R. Salimijazi
    M. Aghaee
    M. Salehi
    E. Garcia
    JOM, 2017, 69 : 2302 - 2308
  • [3] Characterization of Copper Coatings Deposited by High-Velocity Oxy-Fuel Spray for Thermal and Electrical Conductivity Applications
    Salimijazi, H. R.
    Aghaee, M.
    Salehi, M.
    Garcia, E.
    JOM, 2017, 69 (11) : 2302 - 2308
  • [4] Solution precursor high-velocity oxy-fuel spray ceramic coatings
    Chen, Dianying
    Jordan, Eric H.
    Gell, Maurice
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2009, 29 (16) : 3349 - 3353
  • [5] Parameter studies on high-velocity oxy-fuel spraying of MCrAlY coatings
    Lugscheider, E
    Herbst, C
    Zhao, LD
    SURFACE & COATINGS TECHNOLOGY, 1998, 108 (1-3): : 16 - 23
  • [6] Residual stresses in high-velocity oxy-fuel metallic coatings
    T. C. Totemeier
    R. N. Wright
    W. D. Swank
    Metallurgical and Materials Transactions A, 2004, 35 : 1807 - 1814
  • [7] Residual stresses in high-velocity oxy-fuel metallic coatings
    Totemeier, TC
    Wright, RN
    Swank, WD
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2004, 35A (06): : 1807 - 1814
  • [8] Numerical simulation on supersonic flow in High-Velocity Oxy-Fuel thermal spray gun
    Hiroshi Katanoda
    Hideki Yamamoto
    Kazuyasu Matsuo
    Journal of Thermal Science, 2006, 15 : 65 - 70
  • [9] Aerodynamic Study on Supersonic Flows in High-Velocity Oxy-Fuel Thermal Spray Process
    Katanoda, Hiroshi
    Matsuoka, Takeshi
    Kuroda, Seiji
    Kawakita, Jin
    Fukanuma, Hirotaka
    Matsuo, Kazuyasu
    JOURNAL OF THERMAL SCIENCE, 2005, 14 (02) : 126 - 129
  • [10] Numerical Simulation on Supersonic Flow in High-Velocity Oxy-Fuel Thermal Spray Gun
    Hiroshi KATANODA
    Hideki YAMAMOTO
    Kazuyasu MATSUO
    Journal of Thermal Science, 2006, (01) : 65 - 70
12345