On-line dead-time compensation method based on time delay control

被引:91
作者
Kim, HS [1 ]
Kim, KH [1 ]
Youn, MJ [1 ]
机构
[1] Korea Adv Inst Sci & Technol, Dept Elect Engn & Comp Sci, Taejon 305701, South Korea
关键词
dead-time compensation; DSP; pulse-modulation (PM) synchronous motor; time-delay control;
D O I
10.1109/TCST.2003.809251
中图分类号
TP [自动化技术、计算机技术];
学科分类号
0812 ;
摘要
In this work an on-line dead-time compensation method based on a time delay control for a pulse-modulation (PM) synchronous motor drive is presented. Disturbance voltages caused by the dead time are estimated on-line without any additional circuits nor off-line experimental measurements. The estimated disturbance, voltages are fed back to the voltage reference as compensation. The proposed method is applied to a PM synchronous motor drive system and implemented using a DSP TMS320C31. The experimental results show the effectiveness of the proposed method.
引用
收藏
页码:279 / 285
页数:7
相关论文
共 7 条
[1]   A model reference observer for time-delay control and its application to robot trajectory control [J].
Chang, PH ;
Lee, JW .
IEEE TRANSACTIONS ON CONTROL SYSTEMS TECHNOLOGY, 1996, 4 (01) :2-10
[2]   Inverter output voltage synthesis using novel dead time compensation [J].
Choi, JW ;
Sul, SK .
IEEE TRANSACTIONS ON POWER ELECTRONICS, 1996, 11 (02) :221-227
[3]   A NEW COMPENSATION STRATEGY REDUCING VOLTAGE-CURRENT DISTORTION IN PWM VSI SYSTEMS OPERATING WITH LOW OUTPUT VOLTAGES [J].
CHOI, JW ;
SUL, SK .
IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, 1995, 31 (05) :1001-1008
[4]   A simple and robust digital current control technique of a PM synchronous motor using time delay control approach [J].
Kim, KH ;
Youn, MJ .
IEEE TRANSACTIONS ON POWER ELECTRONICS, 2001, 16 (01) :72-82
[5]  
Munoz-Garcia A, 1998, APPL POWER ELECT CO, P95, DOI 10.1109/APEC.1998.647675
[6]  
Ogata K., 1995, Discrete-Time Control Systems-Second Edition
[7]   FULLY DIGITAL, VECTOR-CONTROLLED PWM VSI-FED AC DRIVES WITH AN INVERTER DEAD-TIME COMPENSATION STRATEGY [J].
SUKEGAWA, T ;
KAMIYAMA, K ;
MIZUNO, K ;
MATSUI, T ;
OKUYAMA, T .
IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, 1991, 27 (03) :552-559