A testing setup for the quality control measurements of phototubes for CMS-CASTOR calorimeter

被引：0

作者：

Dumanoglu, Isa ^{[1
]}

Onengut, Gulsen ^{[1
]}

Sogut, Kenan ^{[2
]}

机构：

[1] Cukurova Univ, Dept Phys, Adana, Turkey

[2] Mersin Univ, Dept Phys, Mersin, Turkey

来源：

SIX INTERNATIONAL CONFERENCE OF THE BALKAN PHYSICAL UNION | 2007年 / 899卷

关键词：

photomultiplier; calorimeter; PMT gain; rise time;

D O I：

暂无

中图分类号：

O4 [物理学];

学科分类号：

0702 ;

摘要：

The CMS-CASTOR calorimeter is designed to study the very forward, baryon-rich region in heavy ion collisions. Together with ZDC, it will make possible the covering of almost the whole angular region for CMS. CASTOR consists of quartz plates in a heavy metal matrix. Cherenkov light produced in the quartz plates will be detected by Hamamatsu R5380 Photomultipher Tubes (PMTs). All the PMTs which will be used in the calorimeter have to be verified for gain and timing characterisation to have the performance required by CMS-CASTOR Group before their installation into the calorimeter. We established a testing station at Cukurova University for this purpose. In the present paper we are going to give the anode dark current and gain measurements of these PMTs.

引用

页码：221 / +

页数：2

共 17 条

[1] Measurements of very-forward energy with the CASTOR calorimeter of CMS
Baur, Sebastian
XX INTERNATIONAL SYMPOSIUM ON VERY HIGH ENERGY COSMIC RAY INTERACTIONS (ISVHECRI 2018), 2019, 208
[2] Production and quality control of optical elements for the end cap hadron calorimeter of the CMS setup
V. V. Abramov
A. A. Volkov
P. I. Goncharov
A. A. Zaichenko
A. V. Korablev
Yu. P. Korneev
A. N. Krinitsyn
V. I. Kryshkin
A. A. Markov
V. V. Talov
L. K. Turchanovich
Instruments and Experimental Techniques, 2005, 48 : 22 - 31
[3] Production and quality control of optical elements for the end cap hadron calorimeter of the CMS setup
Abramov, VV
Volkov, AA
Goncharov, PI
Zaichenko, AA
Korablev, AV
Korneev, YP
Krinitsyn, AN
Kryshkin, VI
Markov, AA
Talov, VV
Turchanovich, LK
INSTRUMENTS AND EXPERIMENTAL TECHNIQUES, 2005, 48 (01) : 22 - 31
[4] Production and quality control of the CMS end cap hadron calorimeter optical elements
Abramov, VV
Goncharov, PI
Korablev, AV
Korneev, YP
Krinitsyn, AN
Kryshkin, VI
Markov, AA
Talov, VV
Turchanovich, LK
Volkov, AA
Zaichenko, AA
NUCLEAR PHYSICS B-PROCEEDINGS SUPPLEMENTS, 2006, 150 : 110 - 113
[5] Performance of ACCOS, an automatic crystal quality control system for the PWO crystals of the CMS calorimeter
Auffray, E
Chevenier, G
Freire, M
Lecoq, P
Le Goff, JM
Marcos, R
Drobychev, G
Missévitch, O
Oskine, A
Zouevsky, R
Peigneux, JP
Schneegans, M
NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION A-ACCELERATORS SPECTROMETERS DETECTORS AND ASSOCIATED EQUIPMENT, 2001, 456 (03): : 325 - 341
[6] Early prototyping and testing of CERN LHC CMS high-granularity calorimeter slow-control system
Rosado, Martim
Mallios, Stavros
Tomas, Pedro
Roma, Nuno
David, Andre
2022 IEEE INTERNATIONAL WORKSHOP ON RAPID SYSTEM PROTOTYPING, RSP, 2022, : 36 - 42
[7] Process quality control strategy for the Phase-2 Upgrade of the CMS Outer Tracker and High Granularity Calorimeter
Hinger, V.
NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION A-ACCELERATORS SPECTROMETERS DETECTORS AND ASSOCIATED EQUIPMENT, 2020, 982
[8] CBCT Quality Control Testing: Baseline Measurements and Artifacts
Hamdani, K.
Paden, R. G.
Sensakovic, W. F.
MEDICAL PHYSICS, 2024, 51 (10) : 7856 - 7856
[9] A simple testing method for quality control of phosphate coatings based on impedance measurements
G. Lendvay-Győrik
G. Mészáros
B. Lengyel
Journal of Applied Electrochemistry, 2002, 32 : 891 - 896
[10] A simple testing method for quality control of phosphate coatings based on impedance measurements
Lendvay-Gyorik, G
Mészáros, G
Lengyel, B
JOURNAL OF APPLIED ELECTROCHEMISTRY, 2002, 32 (08) : 891 - 896

← 1 2 →