POLYSACCHARIDE-BASED 3D PRINTING INKS SUPPLEMENTED WITH ADDITIVES

被引：0
|
作者：
Cernencu, Alexandra [1 ]
Lungu, Adriana [1 ,2 ]
Stancu, Izabela Cristina [1 ,2 ]
Vasile, Eugeniu [3 ]
Iovu, Horia [1 ]
机构：
[1] Univ Politehn Bucuresti, Fac Appl Chem & Mat Sci, Dept Bioresources & Polymer Sci, Adv Polymer Mat Grp, Bucharest, Romania
[2] Univ Politehn Bucuresti, Fac Med Engn, Bucharest, Romania
[3] Univ Politehn Bucuresti, Dept Sci & Engn Oxide Mat & Nanomat, Bucharest, Romania
来源：
UNIVERSITY POLITEHNICA OF BUCHAREST SCIENTIFIC BULLETIN SERIES B-CHEMISTRY AND MATERIALS SCIENCE | 2019年 / 81卷 / 04期
关键词：
polysaccharides based-inks; 3D printing; wetting agents; RHEOLOGICAL PROPERTIES; SUSPENSIONS;
D O I：
暂无
中图分类号：
O6 [化学];
学科分类号：
0703 ;
摘要：
The design of 3D printable formulations by combining different polysaccharides with effective additives is the key direction of the current paper. Promising bi-component inks were formulated using one type of cellulose (carboxymethylcellulose or nanocellulose) in combination with sodium alginate, a natural polysaccharide isolated from marine algae. To attain a good printability a proper selection of the ink components was carried out. Moreover, suitable additives were employed to modulate specific physical properties. For the preparation of the printable inks a wetting agent (glycerol/PEG) was added. Therefore, this work provides a comprehensive study of the additives' impact over the rheological and printing properties of polysaccharides-based-materials.
引用
收藏
页码：175 / 186
页数：12
相关论文
共 50 条
  • [1] Polysaccharide-based 3d printing inks supplemented with additives
    Cernencu, Alexandra
    Lungu, Adriana
    Stancu, Izabela Cristina
    Vasile, Eugeniu
    Iovu, Horia
    UPB Scientific Bulletin, Series B: Chemistry and Materials Science, 2019, 81 (04): : 175 - 186
  • [2] Polysaccharide-based biomaterials in a journey from 3D to 4D printing
    Shokrani, Hanieh
    Shokrani, Amirhossein
    Seidi, Farzad
    Mashayekhi, Mohammad
    Kar, Saptarshi
    Nedeljkovic, Dragutin
    Kuang, Tairong
    Saeb, Mohammad Reza
    Mozafari, Masoud
    BIOENGINEERING & TRANSLATIONAL MEDICINE, 2023, 8 (04)
  • [3] 3D Printing of Polysaccharide-Based Hydrogel Scaffolds for Tissue Engineering Applications: A Review
    Tamo, Arnaud Kamdem
    Djouonkep, Lesly Dasilva Wandji
    Selabi, Naomie Beolle Songwe
    INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES, 2024, 270
  • [4] 3D Printing of Strong Lightweight Cellular Structures Using Polysaccharide-Based Composite Foams
    Voisin, Hugo P.
    Gordeyeva, Korneliya
    Siqueira, Gilberto
    Hausmann, Michael K.
    Studart, Andre R.
    Bergstrom, Lennart
    ACS SUSTAINABLE CHEMISTRY & ENGINEERING, 2018, 6 (12): : 17160 - +
  • [5] Microbial Polysaccharide-Based Formulation with Silica Nanoparticles; A New Hydrogel Nanocomposite for 3D Printing
    Marin, Maria Minodora
    Gifu, Ioana Catalina
    Pircalabioru, Gratiela Gradisteanu
    Kaya, Madalina Albu
    Constantinescu, Rodica Roxana
    Alexa, Rebeca Leu
    Trica, Bogdan
    Alexandrescu, Elvira
    Nistor, Cristina Lavinia
    Petcu, Cristian
    Ianchis, Raluca
    GELS, 2023, 9 (05)
  • [6] Biocomposite Inks for 3D Printing
    Chinga-Carrasco, Gary
    BIOENGINEERING-BASEL, 2021, 8 (08):
  • [7] Chitosan-based inks for 3D printing and bioprinting
    Taghizadeh, Mohsen
    Taghizadeh, Ali
    Yazdi, Mohsen Khodadadi
    Zarrintaj, Payam
    Stadler, Florian J.
    Ramsey, Joshua D.
    Habibzadeh, Sajjad
    Hosseini Rad, Somayeh
    Naderi, Ghasem
    Saeb, Mohammad Reza
    Mozafari, Masoud
    Schubert, Ulrich S.
    GREEN CHEMISTRY, 2022, 24 (01) : 62 - 101
  • [8] Development of aqueous protein/polysaccharide mixture-based inks for 3D printing towards food applications
    Zhang, Chi
    Wang, Chang-Sheng
    Therriault, Daniel
    Heuzey, Marie-Claude
    FOOD HYDROCOLLOIDS, 2022, 131
  • [9] Hot melt inks for 3D printing
    Chovancova, V
    Pekarovicova, A
    Fleming, PD
    DIGITAL FABRICATION 2005, FINAL PROGRAM AND PROCEEDINGS, 2005, : 143 - 147
  • [10] A Guide to Polysaccharide-Based Hydrogel Bioinks for 3D Bioprinting Applications
    Teixeira, Maria C.
    Lameirinhas, Nicole S.
    Carvalho, Joao P. F.
    Silvestre, Armando J. D.
    Vilela, Carla
    Freire, Carmen S. R.
    INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES, 2022, 23 (12)
12345