Preliminary design of electrostatic sensors for MITICA beam line components

被引：8

作者：

Spagnolo, S. ^{[1
]}

Spolaore, M. ^{[1
]}

Palma, M. Dalla ^{[1
]}

Pasqualotto, R. ^{[1
]}

Sartori, E. ^{[1
]}

Serianni, G. ^{[1
]}

Veltri, P. ^{[1
]}

机构：

[1] Assoc EURATOM ENEA Fus, Consorzio RFX, I-35127 Padua, Italy

来源：

REVIEW OF SCIENTIFIC INSTRUMENTS | 2016年 / 87卷 / 02期

关键词：

Probes - Secondary emission - Negative ions - Temperature measurement - Electron temperature - Electrostatics;

D O I：

10.1063/1.4935612

中图分类号：

TH7 [仪器、仪表];

学科分类号：

0804 ; 080401 ; 081102 ;

摘要：

Megavolt ITER Injector and Concept Advancement, the full-scale prototype of ITER neutral beam injector, is under construction in Italy. The device will generate deuterium negative ions, then accelerated and neutralized. The emerging beam, after removal of residual ions, will be dumped onto a calorimeter. The presence of plasma and its parameters will be monitored in the components of the beam-line, by means of specific electrostatic probes. Double probes, with the possibility to be configured as Langmuir probes and provide local ion density and electron temperature measurements, will be employed in the neutralizer and in the residual ion dump. Biased electrodes collecting secondary emission electrons will be installed in the calorimeter with the aim to provide a horizontal profile of the beam.

引用

页数：3

共 50 条

[1] Final design of electrostatic probes for MITICA beam line components
Spagnolo, Silvia
Spolaore, Monica
Dalla Palma, Mauro
Pasqualotto, Roberto
Barzon, Andrea
Brombin, Matteo
Franchin, Luca
Sartori, Emanuele
Tiso, Andrea
Visentin, Michele
FUSION ENGINEERING AND DESIGN, 2021, 166
[2] Structural Design of an Electrostatic Shield at-600 kV for the MITICA Beam Source
Denizeau, S.
Aprile, D.
Berton, G.
Chitarin, G.
Marcuzzi, D.
Patton, T.
Rizzolo, A.
Tollin, M.
Valente, M.
IEEE TRANSACTIONS ON PLASMA SCIENCE, 2024,
[3] Progress in the MITICA beam source design
Zaccaria, P.
Agostinetti, P.
Marcuzzi, D.
Pavei, M.
Pilan, N.
Rizzolo, A.
Sonato, P.
Spada, F.
Trevisan, L.
REVIEW OF SCIENTIFIC INSTRUMENTS, 2012, 83 (02):
[4] The beam source of the MITICA experiment: Strategy adopted, manufacturing design, engineering and fabrication of the main components
Masiello, A.
Ballester, R. Moron
Bailly-Maitre, L.
Readman, P.
Geli, F.
Marcuzzi, D.
FUSION ENGINEERING AND DESIGN, 2023, 193
[5] Design and test of a module of a breathable Electrostatic Shield for the MITICA 1 MV negative ion Beam Source
Chitarin, G.
Patton, T.
Pilan, N.
Sartori, E.
JOURNAL OF INSTRUMENTATION, 2024, 19 (10):
[6] Final design of the beam source for the MITICA injector
Marcuzzi, D.
Agostinetti, P.
Dalla Palma, M.
De Muri, M.
Chitarin, G.
Gambetta, G.
Marconato, N.
Pasqualotto, R.
Pavei, M.
Pilan, N.
Rizzolo, A.
Serianni, G.
Toigo, V.
Trevisan, L.
Visentin, M.
Zaccaria, P.
Zaupa, M.
Boilson, D.
Graceffa, J.
Hemsworth, R. S.
Choi, C. H.
Marti, M.
Roux, K.
Singh, M. J.
Masiello, A.
Froeschle, M.
Heinemann, B.
Nocentini, R.
Riedl, R.
Tobari, H.
de Esch, H. P. L.
Muvvala, V. N.
REVIEW OF SCIENTIFIC INSTRUMENTS, 2016, 87 (02):
[7] Preliminary design of a laser accelerator beam line
Shang Yong
Zhu Kun
Cao Chao
Zhu Jun-Gao
Lu Yuan-Rong
Guo Zhi-Yu
Chen Jia-Er
Yan Xue-Qing
CHINESE PHYSICS C, 2014, 38 (11)
[8] Preliminary design of a laser accelerator beam line
尚勇
朱昆
曹超
朱军高
陈元荣
郭之虞
陈佳洱
颜学庆
Chinese Physics C, 2014, (11) : 109 - 112
[9] Preliminary design of a laser accelerator beam line
尚勇
朱昆
曹超
朱军高
陈元荣
郭之虞
陈佳洱
颜学庆
Chinese Physics C, 2014, 38 (11) : 109 - 112
[10] DESIGN OF BEAM LINE COMPONENTS FOR THE HIGH-POWER WIGGLER BEAM LINE AT CHESS
SHEN, Q
HENDERSON, C
KEEFFE, M
MARSTON, M
FINKELSTEIN, KD
BATTERMAN, BW
NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION A-ACCELERATORS SPECTROMETERS DETECTORS AND ASSOCIATED EQUIPMENT, 1994, 347 (1-3): : 609 - 614

← 1 2 3 4 5 →