Study on Tool Wear of Cutting Ti-6Al-4V with Water Steam as coolant and Lubricant in green machining

被引：2

作者：

Zhang Yue ^{[1
]}

Han Rongdi ^{[2
]}

Sun Taili ^{[3
]}

Li Qidong ^{[3
]}

Zhang Xichuan ^{[3
]}

机构：

[1] Shenyang Univ Technol, Sch Mech Engn, Shenyang, Peoples R China

[2] Harbin Inst Technol, Sch Mechatron Engn, Harbin, Heilongjiang, Peoples R China

[3] Shenyang Univ Technol, Sch Mat Sci & Engn, Shenyang, Peoples R China

来源：

MANUFACTURING SCIENCE AND ENGINEERING, PTS 1-5 | 2010年 / 97-101卷

基金：

中国国家自然科学基金;

关键词：

green machining; water steam; coolant; lubricant; turning; titanium alloy;

D O I：

10.4028/www.scientific.net/AMR.97-101.2365

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

To achieve green machining of titanium alloy Ti-6Al-4V with water steam cooling and lubricating, a 600-800w minitype generator is developed. Compared to dry and water-based emulsion, the using of water steam improves Ti-6Al-4V machinability and prolongs the tool life about I time and 0.5 times. And if the same tool life was selected, it would be easy to obtain that as water steam applied the cutting speed can increase about 15% and 10%. As a result, the productivity can be increased. The excellent cooling and lubricating action of water steam could be summarized that water molecule has a small diameter and high speed, can be easily and rapidly to penetrate the capillaries and proceed adsorption in the cutting zone. The results indicate that the using of water steam has the potential to attain the green machining of titanium alloy Ti-6Al-4V.

引用

页码：2365 / +

页数：2

共 50 条

[1] Study on Turning of Ti-6Al-4V with Water Steam as Coolant And Lubricant in Green Machining
Zhang, Y.
Han, R. D.
Tang, Y. L.
Wang, Y.
FUNCTIONAL MANUFACTURING TECHNOLOGIES AND CEEUSRO I, 2010, 426-427 : 186 - 190
[2] Study of the effect of oxygen level on tool wear in machining Ti-6Al-4V
Bergmann, Benjamin
Schaper, Florian
CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2024, 73 (01) : 41 - 44
[3] Investigation of machining Ti-6Al-4V with graphene oxide nanofluids: Tool wear, cutting forces and cutting vibration
Yi, Shuang
Li, Jinjin
Zhu, Jiahua
Wang, Xiangzhi
Mo, John
Ding, Songlin
JOURNAL OF MANUFACTURING PROCESSES, 2020, 49 (35-49) : 35 - 49
[4] HIGH-SPEED MACHINING OF TI-6AL-4V WITH A MICRO TEXTURED CUTTING TOOL FOCUSING ON COOLANT BEHAVIORS
Hasegawa, Mitsuru
Sugihara, Tatsuya
PROCEEDINGS OF THE JSME 2020 CONFERENCE ON LEADING EDGE MANUFACTURING/MATERIALS AND PROCESSING, LEMP2020, 2020,
[5] Investigations of tool wear with water vapor as coolant and lubricant in green cutting
Zhang, Y.
Jiang, T.
Han, L.
Li, Q. D.
Sun, T. L.
Zhang, X. C.
EQUIPMENT MANUFACTURING TECHNOLOGY AND AUTOMATION, PTS 1-3, 2011, 317-319 : 556 - +
[6] Study on lubricating characteristic and tool wear with water vapor as coolant and lubricant in green cutting
Liu, Junyan
Han, Rongdi
Zhang, Li
Guo, Hongbin
WEAR, 2007, 262 (3-4) : 442 - 452
[7] An Experimental Study of the Effect of the Cutting Conditions on Tool Edge Wear in High-speed Machining of Ti-6Al-4V
Fang, N.
Pai, P. Srinivasa
Edwards, N.
4TH INTERNATIONAL CONFERENCE ON MATERIALS ENGINEERING FOR ADVANCED TECHNOLOGIES (ICMEAT 2015), 2015, : 56 - 59
[8] Evolution of tool wear and its effect on cutting forces during dry machining of Ti-6Al-4V alloy
Sun, Shoujin
Brandt, Milan
Mo, John P. T.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2014, 228 (02) : 191 - 202
[9] Effect of cutting parameters on machining surface and cutting tool in milling of Ti-6Al-4V alloy
Celik, Yahya Hisman
Karabiyik, Ahmet
INDIAN JOURNAL OF ENGINEERING AND MATERIALS SCIENCES, 2016, 23 (05) : 349 - 356
[10] Tool Wear of Poly Crystalline Diamond in Cutting Ti-6Al-4V Alloy with High-Pressure Coolant Supplied
Wada, Tadahiro
Okayama, Kazuki
2017 8TH INTERNATIONAL CONFERENCE ON MECHANICAL AND AEROSPACE ENGINEERING (ICMAE), 2017, : 50 - 55

← 1 2 3 4 5 →