High strength C-Mn steels for automotive applications

被引：0
|
作者：
Evans, PJ [1 ]
Crawford, LK [1 ]
Jones, A [1 ]
机构：
[1] British Steel Strip Prod, Welsh Technol Ctr, Port Talbot, Wales
来源：
IRONMAKING & STEELMAKING | 1997年 / 24卷 / 05期
关键词：
D O I：
暂无
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
Many automotive structural components are formed from hot rolled sheet steels produced on continuous hot strip mills. Higher strength steels can be used either to improve component strength or to compensate for a decrease in ga uge to achieve weight reduction. The loss in formability which occurs with increasing strength presents problems with the use of higher strength steels for a number of automotive applications. To allow wider usage, British Steel is developing a range of C-Mn steels combining tensile strengths of between 500 and 800 MPa with good cold formability. Strengthening is obtained by generating ferrite-bainite or ferrite-bainite-retained austenite microstructures in conjunction with microstructural refinement and solid solution strengthening. The desired microstructure is developed by precise control of thermomechanical and runout cooling conditions during hot strip mill processing. The presence of retained austenite and its transformation to martensite during cold deformation increases the workhardening rate by the transformation induced plasticity (TRIP) mechanism. (C) 1997 The Institute of Materials.
引用
收藏
页码：361 / 367
页数：7
相关论文
共 50 条
  • [1] High strength and stainless steels for automotive applications
    Demeri, MY
    INNOVATIONS IN PROCESSING AND MANUFACTURING OF SHEET MATERIALS, 2001, : 83 - 95
  • [2] High-strength steels for automotive applications
    Onink, M
    Zijp, J
    Bodin, A
    41ST MECHANICAL WORKING AND STEEL PROCESSING CONFERENCE PROCEEDINGS, VOL 37, 1999, 37 : 61 - 66
  • [3] REVIEW OF THE MECHANICAL PROPERTIES OF HIGH STRENGTH, HIGH-Mn TWIP STEELS FOR AUTOMOTIVE APPLICATIONS
    De Cooman, B. C.
    Chen, L.
    Kim, Han S.
    Estrin, Y.
    Kim, S. K.
    Voswinckel, H.
    NEW DEVELOPMENTS ON METALLURGY AND APPLICATIONS OF HIGH STRENGTH STEELS: BUENOS AIRES 2008, VOLS 1 AND 2, PROCEEDINGS,, 2008, : 69 - +
  • [4] Weldability of Novel Fe-Mn High-Strength Steels for Automotive Applications
    Daniel Keil
    Manuela Zinke
    Helge Pries
    Welding in the World, 2011, 55 : 21 - 30
  • [5] WELDABILITY OF NOVEL Fe-Mn HIGH-STRENGTH STEELS FOR AUTOMOTIVE APPLICATIONS
    Keil, D.
    Zinke, M.
    Pries, H.
    WELDING IN THE WORLD, 2011, 55 (11-12) : 21 - 30
  • [6] Determination of the Non-Recrystallisation Temperature (Tnr) of Austenite in High Strength C-Mn steels
    Gautam, J.
    Miroux, A.
    Moerman, J.
    Barbatti, C.
    van Liempt, P.
    Kestens, L. A. I.
    THERMEC 2011, PTS 1-4, 2012, 706-709 : 2722 - +
  • [7] Laser weldability of C-Mn steels
    Russell, JD
    METAL WELDING AND APPLICATIONS: THERMOMECHANICAL PROCESSING OF ALLOYS, 1999, : 251 - 266
  • [8] Galvanizability of high-strength steels for automotive applications
    Mahieu, J
    Claessens, S
    De Cooman, BC
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2001, 32 (11): : 2905 - 2908
  • [9] Galvanizability of high-strength steels for automotive applications
    J. Mahieu
    B. C. De Cooman
    S. Claessens
    Metallurgical and Materials Transactions A, 2001, 32 : 2905 - 2908
  • [10] Development of advanced high strength steels for automotive applications
    Jin, Y. S.
    METALLURGIA ITALIANA, 2011, (06): : 43 - 48
12345