Evaluation of stress concentration of U-shaped notch based on residual magnetic field measurements

被引：6
|
作者：
Bao, Sheng [1 ]
Jin, Pengfei [1 ]
Zhao, Zhengye [1 ]
Luo, Qiang [1 ]
机构：
[1] Zhejiang Univ, Inst Struct Engn, Hangzhou 310058, Zhejiang, Peoples R China
来源：
STRAIN | 2019年 / 55卷 / 06期
关键词：
residual stress; stress concentration; tangential RMF signal; U-shaped notch; MEMORY SIGNAL;
D O I：
10.1111/str.12328
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
In this research, the correlation between the stress concentration and the residual magnetic field (RMF) of 30Cr steel was investigated. Tensile tests were carried out to measure the RMF signals on the surface of U-shaped defect specimens. It was found that the tangential RMF signal at the defect area is correlated to the applied load and the stress concentration factor. A new method based on magnetic field to evaluate the stress concentration degree is proposed. This research provides a potential possibility for quantitative inspection of the stress concentration in ferromagnetic steels using the RMF measurements.
引用
收藏
页数：13
相关论文
共 50 条
  • [1] Quantitative evaluation of stress concentration in ferromagnetic steels based on residual magnetic field measurements
    Bao, S.
    Jin, P. F.
    Zhao, Z. Y.
    Fu, M. L.
    INSIGHT, 2019, 61 (07) : 389 - 394
  • [2] Evaluation of stress concentration degree of ferromagnetic steels based on residual magnetic field measurements
    Bao, Sheng
    Lou, Huangjie
    Zhao, Zhengye
    JOURNAL OF CIVIL STRUCTURAL HEALTH MONITORING, 2020, 10 (01) : 109 - 117
  • [3] Evaluation of stress concentration degree of ferromagnetic steels based on residual magnetic field measurements
    Sheng Bao
    Huangjie Lou
    Zhengye Zhao
    Journal of Civil Structural Health Monitoring, 2020, 10 : 109 - 117
  • [4] Evaluation of stress concentration of a low-carbon steel based on residual magnetic field measurements
    Bao, S.
    Fu, M. L.
    Lou, H. J.
    Bai, S. Z.
    Hu, S. N.
    INSIGHT, 2016, 58 (12) : 678 - 682
  • [5] A simplified method for evaluating singular stress field and fatigue strength of U-shaped notch
    Shen, Wei
    Qiu, Yu
    Yan, RenJun
    Xu, Linzhi
    Liu, Enqian
    MARINE STRUCTURES, 2020, 72
  • [6] Evaluation of residual stress in ferromagnetic steels based on residual magnetic field measurements
    Roskosz, Maciej
    Bieniek, Michal
    NDT & E INTERNATIONAL, 2012, 45 (01) : 55 - 62
  • [7] Stress concentration in a solid with symmetric U-shaped grooves
    Tian, Z
    Zhao, F
    JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, 2001, 36 (02): : 211 - 217
  • [8] Analysis of the universality of the residual stress evaluation method based on residual magnetic field measurements
    Roskosz, Maciej
    Bieniek, Michal
    NDT & E INTERNATIONAL, 2013, 54 : 63 - 68
  • [9] Stress concentration factors for three-point bending beam with single-edge U-shaped notch
    School of Architecture and Environment, Sichuan Univ., Chengdu 610065, China
    Sichuan Daxue Xuebao (Gongcheng Kexue Ban), 2007, 3 (1-6):
  • [10] A COMPARISON OF STRESS-CONCENTRATION FACTORS IN HYPERBOLIC AND U-SHAPED GROOVES
    FLYNN, PD
    ROLL, AA
    EXPERIMENTAL MECHANICS, 1967, 7 (06) : 272 - &
12345