Numerical study of the thermal performance of the CERN Linac3 ion source miniature oven

被引：3
|
作者：
Fichera, C. [1 ]
Carra, F. [1 ]
Kuchler, D. [1 ]
Toivanen, V [2 ]
机构：
[1] European Org Nucl Res CERN, Geneva, Switzerland
[2] GANIL, Caen, France
来源：
NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION A-ACCELERATORS SPECTROMETERS DETECTORS AND ASSOCIATED EQUIPMENT | 2018年 / 901卷
关键词：
Linear accelerator; Accelerator equipment design; CERN; Finite elements method; Numerical thermal analysis; Heat transfer;
D O I：
10.1016/j.nima.2018.05.036
中图分类号：
TH7 [仪器、仪表];
学科分类号：
0804 ; 080401 ; 081102 ;
摘要：
The Linac3 ion source at CERN produces lead ion beams by the vaporization of solid samples inside the internal ovens and the consequent ionization of the evaporated material in the plasma. The geometry, materials and surface state of the oven elements are critical parameters influencing the oven temperature characteristics and consequently the evaporation properties and the ion source performance. A dedicated test stand was assembled and a finite element approach is proposed to evaluate the thermal response of the system at increasing heating powers. Comparisons between the simulation results and experimental measurements are given in order to validate the numerical model. Radiation was found to be the main heat transfer mechanism governing the system. Based on the obtained results, improvements to the existing setup are analysed.
引用
收藏
页码：21 / 31
页数：11
相关论文
共 50 条
  • [1] Study of the Micro Oven for the Linac3 Heavy Ion Source
    Koevener, T.
    Fichera, C.
    Kuechler, D.
    Toivanen, V. A.
    PROCEEDINGS OF THE 17TH INTERNATIONAL CONFERENCE ON ION SOURCES, 2018, 2011
  • [2] The 2017 Xe run at CERN Linac3: Measurements and beam dynamics simulations
    Benedetti, S.
    Bellodi, G.
    Kuchler, D.
    Toivanen, V.
    REVIEW OF SCIENTIFIC INSTRUMENTS, 2018, 89 (12):
  • [3] Simulation of Beam Formation in the CERN Negative Ion Source for the Linac4 Accelerator
    Vnuchenko, A.
    Lettry, J.
    Mochalskyy, S.
    Wunderlich, D.
    Fantz, U.
    Revel, A.
    Minea, T.
    19TH INTERNATIONAL CONFERENCE ON ION SOURCES - ICIS2021, 2022, 2244
  • [4] Characterisation and performance of the CERN ECR4 ion source
    Andresen, C
    Chamings, J
    Coco, V
    Hill, CE
    Küchler, D
    Lombardi, A
    Sargsyan, E
    Scrivens, R
    ELECTRON CYCLOTRON RESONANCE ION SOURCES, 2005, 749 : 161 - 164
  • [5] H- extraction systems for CERN's Linac4 H- ion source
    Fink, D. A.
    Kalvas, T.
    Lettry, J.
    Midttun, O.
    Noll, D.
    NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION A-ACCELERATORS SPECTROMETERS DETECTORS AND ASSOCIATED EQUIPMENT, 2018, 904 : 179 - 187
  • [6] Lead evaporation instabilities and failure mechanisms of the micro oven at the GTS-LHC ECR ion source at CERN
    Kovener, T.
    Kuchler, D.
    Toivanen, V. A.
    REVIEW OF SCIENTIFIC INSTRUMENTS, 2020, 91 (01):
  • [7] H- beam formation simulation in negative ion source for CERN's Linac4 accelerator
    Vnuchenko, A.
    Lettry, J.
    Mochalskyy, S.
    Wuenderlich, D.
    Fantz, U.
    Lindqvist, M.
    Revel, A.
    Minea, T.
    JOURNAL OF INSTRUMENTATION, 2023, 18 (08):
  • [8] Numerical and Experimental Study of Atomic Transport and Balmer Line Intensity in Linac4 Negative Ion Source
    Shibata, T.
    Mattei, S.
    Nishida, K.
    Lettry, J.
    Hatayama, A.
    FOURTH INTERNATIONAL SYMPOSIUM ON NEGATIVE IONS, BEAMS AND SOURCES (NIBS 2014), 2015, 1655
  • [9] A numerical study of the thermal entrance effect in miniature thermal conductivity detectors
    Kim, YM
    Kim, WS
    Chun, WG
    HEAT TRANSFER ENGINEERING, 2005, 26 (04) : 65 - 72
  • [10] Study on the microwave ion source of the 100-MeV proton linac
    Kwon, Hyeok-Jung
    JOURNAL OF THE KOREAN PHYSICAL SOCIETY, 2016, 69 (06) : 967 - 970
12345