Sensorless vector controlled converter for variable speed wind generation system using an induction generator

被引：1

作者：

Ohyama, Kazuhiro ^{[1
]}

Arinaga, Shinji ^{[1
]}

Shigemizu, Teturou ^{[1
]}

机构：

[1] Fukuoka Inst Technol, Fukuoka, Japan

来源：

ELECTRICAL ENGINEERING IN JAPAN | 2007年 / 159卷 / 04期

关键词：

converters; vector control; sensorless and induction generator;

D O I：

10.1002/eej.20323

中图分类号：

TM [电工技术]; TN [电子技术、通信技术];

学科分类号：

0808 ; 0809 ;

摘要：

This paper proposed two types of speed sensorless converters that can control rotational speed and electric power. One is based on a slip frequency control system. The other is based on a vector control system. The rotational speed of the wind turbine is estimated with the phase voltage and phase current of the induction generator by the adaptive rotor flux observer. The estimated wind turbine rotational speed omega(est)(r) is used as the feedback of the speed control loop in the converter control system. Also, the estimated rotor flux phi(est)(2d) is used for the vector control. The simulation results confirm that both of them perform satisfactorily under the speed sensorless operation. The method based on the vector control system generates more electrical energy than does the method based on the slip frequency control system. (C) 2007 Wiley Periodicals, Inc.

引用

页码：62 / 75

页数：14

共 50 条

[1] Sensorless vector controlled converter for variable speed wind generation system using an induction generator
Ohyama, Kazuhiro
Arinaga, Shinji
Shigemizu, Teturou
1600, John Wiley and Sons Inc., P.O.Box 18667, Newark, NJ 07191-8667, United States (159):
[2] Speed sensorless control for full-scale converter of wind turbine with induction generator
1600, Science and Engineering Research Support Society (09):
[3] Speed-sensorless vector control of an wind turbine induction generator using artificial neural network
Dumnic, Boris
Popadic, Bane
Milicevic, Dragan
Katic, Vladimir
Oros, Djura
2014 16TH INTERNATIONAL POWER ELECTRONICS AND MOTION CONTROL CONFERENCE AND EXPOSITION (PEMC), 2014, : 371 - 376
[4] Simulation of Variable-Speed Wind Generation System Using Boost Converter of Permanent Magnet Synchronous Generator
Ohyama, Kazuhiro
Sakamoto, Tsuyoshi
Arinaga, Shinji
Yamashita, Yukio
ELECTRICAL ENGINEERING IN JAPAN, 2009, 169 (04) : 37 - 54
[5] Simulation of variable-speed wind generation system using boost converter of permanent magnet synchronous generator
Ohyama, Kazuhiro
Sakamoto, Tsuyoshi
Arinaga, Shinji
Yamashita, Yukio
Electrical Engineering in Japan (English translation of Denki Gakkai Ronbunshi), 2009, 169 (04): : 37 - 54
[6] Sensorless control of single voltage source converter-based doubly fed induction generator for variable speed wind energy conversion system
Naidu, N. Krishna Swami
Singh, Bhim
IET POWER ELECTRONICS, 2014, 7 (12) : 2996 - 3006
[7] Vector Controlled Brushless Doubly Fed Twin Stator Cascaded Induction Generator for Variable Speed Wind Generation Connected to Weak Grids
Abdelkader, Mona I.
Abdelsalam, Ahmed K.
Eldin, Ahmed A. Hossam
2015 17TH EUROPEAN CONFERENCE ON POWER ELECTRONICS AND APPLICATIONS (EPE'15 ECCE-EUROPE), 2015,
[8] Sensorless vector control of induction machines for variable-speed wind energy applications
Cárdenas, R
Peña, R
IEEE TRANSACTIONS ON ENERGY CONVERSION, 2004, 19 (01) : 196 - 205
[9] A vector-controlled doubly-fed induction generator for a variable-speed wind turbine application
Atkinson, DJ
Lakin, RA
Jones, R
TRANSACTIONS OF THE INSTITUTE OF MEASUREMENT AND CONTROL, 1997, 19 (01) : 2 - 12
[10] Sensorless output maximization control for variable-speed wind generation system using IPMSG
Morimoto, S
Nakayama, H
Sanada, M
Takeda, Y
IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, 2005, 41 (01) : 60 - 67

← 1 2 3 4 5 →