Edge collection function: an analytical expression for the optical efficiency of an energy-harvesting device based on photoluminescence

An edge collection function is proposed for characterizing the optical efficiency of an energy-harvesting system that utilizes photoluminescence (PL) in a waveguide. We assume that a single spot in a waveguide is excited and that PL is isotropic. For the photons to be collected by one edge of the waveguide, they must be emitted toward the edge, trapped in the waveguide and they must survive self-absorption on the way. The optical efficiency is formulated as the product of these probabilities. When this function is calculated for every spot on the waveguide and for each wavelength of the PL spectrum, the efficiency of the system is given by super-position. Its validity is checked by a Monte Carlo simulation for the case of no self-absorption loss. In experiment, we fabricate a 5-cm(2) waveguide with a thin layer of Lumogen F Red 305 and measure its efficiency by placing a photodiode array in the vicinity of its edge with a small air gap. The formula roughly reproduces the efficiency and its dependency on the position of the excitation spot. This analytical approach allows one to estimate the optical efficiency for an arbitrary incident light distribution with small computational complexity. (C) The Authors. Published by SPIE under a Creative Commons Attribution 4.0 Unported License.