Synthesis and structure of nitrogenated tetrahedral amorphous carbon thin films prepared by a pulsed filtered vacuum arc deposition

被引:59
|
作者
Zhang, XW [1 ]
Ke, N
Cheung, WY
Wong, SP
机构
[1] Chinese Univ Hong Kong, Dept Elect Engn, Shatin, Hong Kong, Peoples R China
[2] Univ Ulm, Dept Solid State Phys, D-89069 Ulm, Germany
关键词
tetrahedral amorphous carbon; cathodic arc discharge; bonding configurations; coatings;
D O I
10.1016/S0925-9635(02)00246-7
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Nitrogenated tetrahedral amorphous carbon (ta-C:N) thin films have been prepared by a pulsed filtered vacuum arc deposition system at various conditions. The chemical composition and structure of the ta-C:N films were investigated by Non-Rutherford backscattering spectroscopy, Auger electron spectroscopy, Raman, and Fourier transform infrared transmission measurements. It was observed that the amount of N atoms incorporated into the ta-C:N films, as well as the fraction and size of the sp(2) clusters, increased with increasing nitrogen pressure during deposition. On the other hand, the substrate negative bias voltage has different effects on the composition and structure of the films. The N content initially rises with increasing substrate negative bias voltage and then starts to decrease as it is further increased, while the sp(2) fraction increases monotonically with the increase of negative bias voltage. No or very few CdropN bond exists in the films. With increasing N content the components of the single C-N and disorder activated C-C diminish. The compressive stress in the films is found to decrease sharply with the increase of nitrogen content, and then keep almost constant when the N content is increased further. (C) 2002 Elsevier Science B.V All rights reserved.
引用
收藏
页码:1 / 7
页数:7
相关论文
共 50 条
  • [1] Tetrahedral amorphous carbon films prepared by filtered catholic vacuum arc deposition
    Zhang, X
    Wu, XY
    Zhang, HX
    Zhang, TH
    FUNCTIONALLY GRADED MATERIALS VII, 2003, 423-4 : 585 - 589
  • [2] Low stress tetrahedral amorphous carbon films prepared by filtered vacuum arc deposition
    Zhang, X
    Zhang, HX
    Wu, XY
    Zhang, TH
    PRICM 5: THE FIFTH PACIFIC RIM INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND PROCESSING, PTS 1-5, 2005, 475-479 : 3623 - 3626
  • [3] Preparation of tetrahedral amorphous carbon films by filtered cathodic vacuum arc deposition
    Polo, MC
    Andújar, JL
    Hart, A
    Robertson, J
    Milne, WI
    DIAMOND AND RELATED MATERIALS, 2000, 9 (3-6) : 663 - 667
  • [4] Plasma diagnosis of tetrahedral amorphous carbon films by filtered cathodic vacuum arc deposition
    王明磊
    张林
    陆文琪
    林国强
    Plasma Science and Technology, 2023, 25 (06) : 101 - 107
  • [5] Plasma diagnosis of tetrahedral amorphous carbon films by filtered cathodic vacuum arc deposition
    Wang, Minglei
    Zhang, Lin
    Lu, Wenqi
    Lin, Guoqiang
    PLASMA SCIENCE & TECHNOLOGY, 2023, 25 (06)
  • [6] Plasma diagnosis of tetrahedral amorphous carbon films by filtered cathodic vacuum arc deposition
    王明磊
    张林
    陆文琪
    林国强
    Plasma Science and Technology, 2023, (06) : 101 - 107
  • [7] Structure and properties of Si incorporated tetrahedral amorphous carbon films prepared by hybrid filtered vacuum arc process
    Lee, CS
    Lee, KR
    Eun, KY
    Yoon, KH
    Han, JH
    DIAMOND AND RELATED MATERIALS, 2002, 11 (02) : 198 - 203
  • [8] Wear performance of tetrahedral amorphous carbon films prepared by filtered cathodic vacuum arc technique
    Zhang, X
    Yi, ZZ
    Zhang, TH
    Wu, XY
    Wang, GF
    Zhang, HX
    SURFACE & COATINGS TECHNOLOGY, 2002, 161 (2-3): : 120 - 124
  • [9] A tribological study of tetrahedral amorphous carbon films prepared by filtered cathodic vacuum arc technique
    Yu, X
    Zhang, X
    Wang, CB
    Hua, M
    Wang, LG
    VACUUM, 2004, 75 (03) : 231 - 236
  • [10] Nitrogenated tetrahedral amorphous carbon films prepared by ion-beam-assisted filtered cathodic vacuum arc technique for solar cells application
    Cheah, LK
    Shi, X
    Liu, E
    Shi, JR
    APPLIED PHYSICS LETTERS, 1998, 73 (17) : 2473 - 2475