Effect of the angle of inclination of a plate shield on the thermal and hydraulic performance of a plate-fin heat sink

被引：23

作者：

Tsai, Go-Long ^{[1
]}

Li, Hung-Yi ^{[2
]}

Lin, Chien-Cheng ^{[1
]}

机构：

[1] Natl Taipei Univ Technol, Dept Vehicle Engn, Taipei 10626, Taiwan

[2] Huafan Univ, Dept Mech Engn, Taipei 22301, Taiwan

来源：

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER | 2010年 / 37卷 / 04期

关键词：

Inclined shield; Electronic cooling; Plate-fin heat sink; CFD; FLOW BYPASS; FLUID-FLOW; STRIP FIN; ARRAY;

D O I：

10.1016/j.icheatmasstransfer.2010.01.002

中图分类号：

O414.1 [热力学];

学科分类号：

摘要：

Using CFD software FLUENT, we investigated the effect of the angle of inclination of a plate heat shield on the thermal and hydraulic performance of a plate-fin heat sink. The variation of this angle causes a substantial and complicated variation of the flow field in space both upstream and downstream near such a heat sink. This distinctive behavior modifies the pressure drop between the inlet and outlet of the investigated duct, but that variation influences only slightly the flow field in the space from fin to fin, and thus the thermal resistance of the heat sink. This trend is further smoothed with increasing Reynolds number and height of the heat sink. As a compromise between the demands of small thermal resistance and a small pressure drop, the angle of inclination of a plate heat shield must be chosen carefully. (C) 2010 Elsevier Ltd. All rights reserved.

引用

页码：364 / 371

页数：8

共 50 条

[1] Effect of a shield on the hydraulic and thermal performance of a plate-fin heat sink
Li, Hung Yi
Tsai, Go-Long
Chiang, Ming-Hung
Lin, Jhih-Ye
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 2009, 36 (03) : 233 - 240
[2] Measurement of thermal and hydraulic performance of a plate-fin heat sink with a shield
Li, Hung-Yi
Tsai, Go-Long
Chao, Shung-Ming
Yen, Yi-Feng
EXPERIMENTAL THERMAL AND FLUID SCIENCE, 2012, 42 : 71 - 78
[3] Investigation of thermal performance at forced convection in plate-fin heat sink
Kosdere, Ozgun
Sert, Zerrin
Altun, Ozge
ENERGY, 2024, 307
[4] Effect of channel and fin geometries on a trapeze plate-fin heat sink performance
Ozdilli, Ozgur
Sevik, Seyfi
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING, 2021, 235 (05) : 1326 - 1336
[5] A practical plate-fin heat sink model
Wu, Hsin-Hsuan
Hsiao, Yuan-Yuan
Huang, Hsiang-Sheng
Tang, Ping-Huey
Chen, Sih-Li
APPLIED THERMAL ENGINEERING, 2011, 31 (05) : 984 - 992
[6] Numerical simulation of the thermal hydraulic performance of a plate pin fin heat sink
Yuan, Wuhan
Zhao, Jiyun
Tso, C. P.
Wu, Tianhua
Liu, Wei
Ming, Tingzhen
APPLIED THERMAL ENGINEERING, 2012, 48 : 81 - 88
[7] On the thermal analysis of a plate-fin heat sink considering the thermal-entry length effect
Bassiouny, Ramadan
Maher, Hisham
Hegazy, Adel A.
APPLIED THERMAL ENGINEERING, 2016, 99 : 273 - 279
[8] Thermal-hydraulic characteristics of plate-fin heat exchangers with corrugated/vortex-generator plate-fin (CVGPF)
Khoshvaght-Aliabadi, M.
Khoshvaght, M.
Rahnama, P.
APPLIED THERMAL ENGINEERING, 2016, 98 : 690 - 701
[9] Experimental study on the thermal hydraulic performance of plate-fin heat exchangers for cryogenic applications
Jiang, Qingfeng
Zhuang, Ming
Zhang, Qiyong
Zhu, Zhigang
Geng, Maofei
Sheng, Linhai
Zhu, Ping
CRYOGENICS, 2018, 91 : 58 - 67
[10] Numerical Study of the Thermal and Hydraulic Characteristics of Plate-Fin Heat Sinks
Soloveva, Olga V.
Solovev, Sergei A.
Shakurova, Rozalina Z.
PROCESSES, 2024, 12 (04)

← 1 2 3 4 5 →